Search results

Still cant get it to work, even with short names...

I recently upgraded the iOS Texecom app to v2.0.20 I notice when i look in 'Rooms & Devices', under security only certain sensors report back a temperature. All the ones that do were added to the panel back when i was using the old app. Since using the new app i added some more sensors to the...

I need some tiles (or as close to as possible) that match my existing ones in my Kitchen. I have looked at various places and cant seem to find the exact tiles. The tiles have been down perhaps 15 years or so, it may be the case they are not manufactured any more. Any help would be greatly...

This is my own thread!

This is the version number of the Ricochet software, not IP. I'm having the same issue here, if i open Ricochet from Wintex it loads fine, if i try and open Ricochet Monitor 2.18.10.0 and enter the IP of my panel with port as 10001 i cant connect..

I try to connect to my panel using the monitor software but it wont connect, i am on the same subnet as the alarm, enter the alarm IP, leave the port as default (10001) but when i hit connect it says 'Unable to connect to Premier Elite XP-W!'

So it wont work for the new GJA and GHA series sensors? How can i get battery and signal strength information?

Hi, I dont see any of my zones when i access the RF devices page.. any ideas why? I am running Wintex_7_2_2_1 (latest), selecting Diagnostics button then navigating to Control Panel > RF Devices. If i select Network 1 > Ricochet XP01 Devices i see all of my wireless devices as i should, just...

I thought i would share my experience: Purchased a Opti-Myst fireplace back in Dec 2019. Ran for a week or two, noticed the bulbs (and the water tank) get very hot during use! After reading somewhere (may have been on here) they suggested changing the 50W halogen bulbs for 30(35?) watt bulbs...

Looking really good! Great work

Great, thanks for the replies.

In Wintex i have an option for each zone to configure a chime tone. There are 4 options, silent and chime tone 1,2 &3 no matter which of the three chimes i select the keypad and alarm unit only ever chime the same tones. Are the three different chime settings suppose to omit a different tone?

Thanks for the replies guys, ill do away with the tags and just use the codes.

So should i worryu about it? How can i prevent it? Cheers

Hi, In my log for the Texecom Premiere Elite i get the occasional following error reported: 117 22:14:00 01/06/2020 INVALID GROUP . . . . A Corrupt Event Found What could be the cause of this? Cheers

So i have created a user with a code only that can arm and disarm the system, this will generally be used to disarm only using the code I have created a second user with a code and TAG and set this so they can't disarm the system, this will generally be used to arm only using the tag (the code...

Yes this would be acceptable, ill give it a try, thanks for the tip!

Thanks for your replies guys, I dont want to relocate the keybox, once someone gets in the house no-where is technically secure, although yes i could put it in a harder to find location, but this then makes it less convenient. If i do the dual code then does this require the tag (say user A)...

Hi, I am trying to set my Texecom Premiere Elite so that i can use the tag to set the alarm but the alarm can only be unset by entering a valid user code (not via a tag). I have a key box nearby the alarm panel where everyones keys are stored, each persons keys has their own tab for the alarm...