Search results

I had this makita EK6100 guess with carburetor issue and now want fix it but struggling to understand how carburetor comes out. Stihl stuff are 2 minutes job but here seems to be very complicated.

What do you suggest to check in order to get fuel from the tank to carburetor? Fuel filter seem to be clean and not sure what else to check.

Cleaning up the wall. Paint comes off and this is how look like. There is no gap in thickness to make a layer of render. Is there any paint or product to give a more uniform finish?

Got an hedge trimmer jonsered HT21 which start and stops. I rebuilt carburetor but nothing has changed. Lack of my knowledge but how this carburetor works as there is no primer bulb and only one pipe from the tank. I can see petrol struggle to reach the carburetor but opening the tank after...

Thanks for the advice. Will get wire brush to check it and let you know

need to paint this wall but not sure how to make good first as paint came off leaving 1 or 2 mm difference. Any tips would be appreciated

I have replace an horizontal radiator with a vertical radiator but this is making me some headache. It's has not flow direction as all 4 ingress seems to be the same. So I have fitted the Trv and everything but is not heating up on the bottom and TRV side pipe is cold . What I'm doing wrong?

Thanks John I tried to set the L screw as seems like Makita does not allow you to set up the H. Can't see much through the hole but there a screw but can't be moved with a screwdriver like for the L ones. Nothing has changed still behaving odd. Parts for those saw are a nightmare and...

I got this disc cutter off Ebay in a box completely apart I have to say that I have never seen this disc cutter running. I found out piston ring was missing and took me a month to get one in stock. Assembled the saw. Started at first pull but I'm having hard time to tune it. And while left...

Hi everyone After a lot of time and several thoughts on cladding or covering with carpet. I decided to start sanding the stair to see if us still salvageable as I really would like to have it in natural wood look. I still have to keep sanding and would like to ask few question. What grit...

Thanks John He left the mower at my place and I`m aiming to get it sorted over the weekend for him to cut his grass. He will be pleased to hear nothing is missing. Many Thanks

Do I need to cap those holes?

It's the brigg stratton engine with carburetor on top of fuel tank

My neighbour was after a lawnmower and after a while He believes to have got a good bargain. Was sold as working a Qualcast classic 35s. Got home and won't start. He then knocked my front door asking for help. First thing I noticed on the engine block few clean thread where something was...

John, took me a lot of patience but in the end works. It was the emulsion tube not perfectly clean which made me mad. Thanks everyone this now works fine. Still awaiting the carburetor for the Quantum. I'm also fixing a briggs classic 35. It idle fine but won't accelerate. Only accelerating...

I did this test and if I keep pumping the primer the engine last for an extra second or two and stops

John, Thanks for the tips. How you normally know if a carburettor have a rubber needle?

I thought was different cleaner. The main jet was already cleaned with carburetor cleaner and air compressor but has not improved the situation

John, never used Toluene. Is this available to buy somewhere?

I won't open another post but I got a cheap Webb 41 which won't start. I cleaned up carburetor and now start for few second after pushing the primer bulb and then stops. It's driving me mad. What's the issue on this one?