Search results

  1. PcxP

    Risco Nova 6 (GT2240) bell box manual anyone?

    Very old school but does anyone have a manual for the Risco Nova 6 External Bell Box (GT2240)? Looked online, no joy. Short story is as this box is getting a bit long in the tooth, I want to work out if I can remove the 12v backup/tamper switch battery and it will still work correctly. What I...
  2. PcxP

    KKMoon TP-AHD114 DVR/CCTV unit manual needed

    Hi all, Long story short, mother in law has one of these playing up and need to adjust settings. Managed to switch it from Chinese to English, but still need some guidance. Does anyone happen to have a pdf manual for this (or any other KKmoon model as menus will be the same or similar)...
  3. PcxP

    VIVA Skylo cistern, capillary leak along flush cable to push button mechanism

    Most of these issues I come across are pretty easy to identify the root cause, but this one really has me stumped. Per images, seems water is making it's way along the flush cable to the push button mechanism by some form of capillary action. Anyone come across this before or know what could be...
  4. PcxP

    Loft fire sensor for Honeywell Galaxy Flex panel

    Been researching for some time but there don't seem to be any definitive answers out there for this one. I even contacted Texecom directly and they didn't want to give advice, instead stating I should ask an installer. In short, I have a unvented hot water cylinder in the loft, plus two in-line...
  5. PcxP

    Honeywell Galaxy Flex 20 (v1) latest firmware version?

    Hi, Aware my hardware only supports version 1 firmware. I have checked using the keypad and the sticker on the hardware both confirm v1.12. Googling I think there could be at least v1.14 available. Does anyone know what is the newest v1 firmware version actually is, can it be downloaded and...
  6. PcxP

    Galaxy Flex 20 & GPRS +LINE FAILCOM4

    Hi all, I blame the long cold snap, but out of the blue after 10 years of faultless service, my Flex 20 with a GPRS module has thrown a dreaded +Line Failcom4 unclearable fault. I've tried an engineer reset (51.17.1) and a shutdown (51.17.5), unplug module, restart, shutdown and plug back in...
Back
Top