Search results

You're asking in the wrong place

Hmm so the door screws were easily removed and I can see the sealing rope is 12mm My only remaining concern is how do I tighten the glass correctly

I don't see how non-sparks could be employed installing meters

So new door rope and glue yes ? I've done that before so no problem When you say replace all screws you mean the glass retaining screws only ? Also will the door usually come off easy enough. would you use an impact or release spray on the door screws ? Thanks for all the advise

Hi guys. I've to replace the stove glass on the Stanley Oisin Stove is old and I had to drill some of the screws out last time What's the best approach to remove the screws . Should i tip the stove on its side so the door is flat on the floor and apply release spray to the screws ? Thanks...

Could be t+e looped at switch

The domestic SPD you're shoving something in hoping it deals with surges As others were alluding to lightning is a different ball game

There must be a middle ground between public ownership and private Someone more intelligent than me probably knows

Someone will need to provide the water so the story will continue regardless

I would rate the RCD as one of the great electrical innovations For clearing earth faults alone and tripping on electric shock The only time you know they're working is the moment you test them so there is that unreliability AFDDS above surge protection for domestic as they can operate...

Hopefully if all tightened correctly and no damage to switch Probably 50/50 you'll be revisiting the issue

Alarm could be too late . I think damage could be done Got below type for my place not fitted yet

Wire them new from board

why would you buy the cheapest stuff for your own place if that’s the plan

How do you manage without wall units Is that not a bit unergonomic for storage

True The alcohol did play some role

One of the intermediate feeds is always live I think that works , it'd be the same as 2way > int >2way and there's no crossover, i think

No . replace and relocate ideally

You use the existing yellow strappers twice They also feed the intermediate for light 2

How does surface lights look on a ceiling I like the look of a clean ceiling with flush downlights