Search results

Does the dryer part not need a separate waste?

Thanks its a washer dryer do these usualy plumb in the same as washing machines? Just a cold feed and a drain?

Yes the hose pipe with the rubber washer. Is this because if you tighten with grips you can split the washer? Also if putting the drain in to a stand pipe do you need to put anything on it to keep it in the stand put when discharging. And if going on to a uni corn part of a sink trap do you need...

When tightening the connections on a washing machine is hand tight all that is required. Or is say half a turn with a pair or grips needed?

Can flux be affected by heat when stored in a van?

Is any.type of brush ie paint brush etc ok to be used as a flux brush or does it need to be a specific flux brush?

Is any.type of brush ie paint brush etc ok to be used as a flux brush or does it need to be a specific flux brush?

Is it ok to tie wrap the bath waste pipe to the bath cradle ( that connects the legs) . To give it extra support.

the 2 screws for the centre support leg appear to be the same as the ones you use to screw the metal cradle to the black plastic clips that attatch to the wood

No meant the stubby ones for the centre support leg. Do you ever silicone the mixer tap in even though it comes with a washer. If having a shower run off the taps?

Thank you the screws that screw the centre support to the base seem to go alot deeper in to the base then the screws for the cradle. Though not all the way through.

Is there a set distance from the end of the bath to were you screw on the 2 bath cradles that the legs attach to?

It the back pipe just to the left of the light spot on it

IMG_20160624_153157 by Xanderharris1 posted 26 Jun 2016 at 8:51 PM

Does a small dent on a 15mm copper water pipe need cutting out and replacing?

is solvent weld cleaner needed before gluing on a strap on boss

If using a bent pan connector to connect to a 4insoil running at 90 degrees to the toilet is it best to not cut the bent pan connector down and cut the soil pipe. Or the other way around. Or does it make no difference?

The instinct stuff is building certificate approved