Search results

Some printers and and possible woodworking machinery

Thanks for your reply denso, So lay then all side by side with about 3cm gaps between them?

Possibly boiler, workshop tools, fridge, tv, computer Id rather over spec it a little then regret it later, as its a big hassle routing the cable now, and dont ever want to do it again.

Ok guys, thanks for your help.so far, I have no intentions of connecting anything up, fully qualified proffessionals will be doing both the gas and electric connections. I'm here for opinions as i want to make sure the work is done right! So can a electric cable, coax cable, rj45 cable and...

Haha sorry meant kw

A 24watt would be more than sufficient for the outhouse... As for the cooker i have no idea but if you could base it on a average cooker of that size would that make it easier? We may change the cooker soon anyway so would be good over spec a little for future proof

Thanks guy, Really appreciate your help We currently have a 36cdi boiler with about 22 radiators Hot water to Three bathroom one kitchen and one five burner double oven gas cooker, The pipe we have coming into the house is either 22 or 28mm but im not 100% sure at the moment but will...

Hi, I need to take a drainge pipe for wc to the outhouse. I currently have a inspection chamber in the back garden and will extend off that, but the worry is that the depth is around 45 cm which mean if i take the connection off it, about another 12 meters im not sure if the low depth from...

Thanks, What information would you need? If you can please let me know I'll get it

Also would greatful is someone could advise what depth does the trench need to be and whether i could install rj45 and coaxial cables, and gas line in the same trench?

Whats so complex about it? For me yes but someone who knows it should be fairly straightforward? Need gas going to outbuilding and main use is for combi boiler, heating hot water.

No

So the length from the meter to the outbuilding is 35 to 40 meters. From the existing gas supply coming into to house the distance is 12 meters to outbuilding. The current pipe size is 22mm.

We dont really need a seperate meter for billing purposes if thats what your asking? Just want to be able to take a gas line to back with out causing any problems for the existing appliances in the house. If we can safely extend off the existing gas supply in the house then cool, if not then...

Hi, We are thinking of taking gas to our outbuilding, whats the best pipe to use and what size? We intend to use it primarily for a combi boiler and have been advised the best thing would be to run a sperate line going back to tbe gas meter of the house instead of connecting to existing gas...

Hi, Please can someone advise me what swa cable should we be using for our outbuilding? We dont mind over specifying for future proofing. Ive been told 25mm should be enough and would connect to CU in the house. The outbuilding will have its own CU. Im not a electrician hence apologies...

Hi everyone, I hope everyone is safe and coping well through these difficult times. I need some help with a project I’m think of taking on in the future and wanted some structural advice. At the far end of our garden, we have a brick-built summer house and wanted to know if it is possible to...

Hi Woody, Thank you also for your reply. Would under pinning the walls not work? Say if we dug beneath all four walls and poured concrete in, so that walls sit directly onto on top. Will that then not allow for the raft slab to be cut away?

Hi, yes that's a solution if we keep the floor level as it is. We were hoping that to be able to get the desired outcome by making some alteration. Tearing it down would definatley not be worth doing, so not a option.

Hello All, I'd really appreciate all of your expert advice in regards to the best solution for this project. Many years ago we had a brick shed built at the best of the garden. The builder had chosen to build It on a concrete slab instead of a strip foundation. The problem we have now is...