Search results

The socket I'm running from is part of the ring main and I can run the cable within the safe zone (150mm) what I'm.worried about is as the cable will be plastered into a chiselled out run will the heat from.the radiator affect the cable rating

Looking at putting another socket on a wall the problem is theres a radiator in the middle of the cable run so is it safe to run the cable below the radiator chiselled into the wall and plastered over ( I know heat rises ) , because the socket I'm taking the feed from has wires running up to...

THANKS FOR THAT IM TRYING TO LOCATE A NEW FAN MOTOR AND IM HAVING A NIGHTMARE THERE SEEMS TO BE NONE ABOUT ITS A DANISMENT FM62G25/1 DOES ANYONE KNOW WHERE TO GET ONE ............. THANKS

is there any way i can find out what model of Belling Countrychef 924 this is without having to try to drag the cooker out from the wall . i have the serial number which is at the front below the door ,also my fan sometimes takes a minute or two to come on do you know whats causing this...

when the door is opened or closed it trips the rcd ,but for some reason trips it through another circuit ,ie it trips the downstairs sockets circuit and not through the kitchen circuit ,the dishwasher IS on the kitchen circuit ,can anyone help please !!!!!!!!!!!!!!!!!!!!!!!

8545 414 15710 SER 33 0425 008902 does anyone know how to fix this ..thanks

After swiching on ,on the 70 degree programme it runs so far before stopping and the on button flashes 4 times has a break then 4 times and so on ,it runs ok on the 40 degree programme ,when i open the door theres plenty of steam which leads me to think its not the heater .............can you...

I have sent you an e-mail Dave and also put my e-mail address on my profile ........cheers pal much appreciated

WHER CAN I GET A WIRING DIAGRAM FOR A VAILLIANT TURBOMAX 824E BOILER ....NONE ON WEBSITE ........CHEERS

I HAVE A HARDWOOD WINDOW FRAME WHERE THE SCREW FOR THE HANDLE HAS PULLED OUT - CAN I USE FILLER TO REPAIR THIS THEN RE-SCREW- CAN ANYONE RECOMMEND A PRODUCT-THANKS

THE ALARM GUY CAME BACK WENT ROUND THE HOUSE SWITCHING LIGHTS ON AND OFF , THEN HAD A LOOK IN THE CONSUMER UNIT AND THE LIGHTS CAME ON , SOUNDS LIKE HE HAS KNICKED A WIRE WHEN CHANGING THE ALARM OVER TO GET A DEAD SHORT - ANYWAY ALLS WELL THAT ENDS WELL-HE DID SAY HE DID NOT KNOW WHAT THE...

SHE HAD A NEW ALARM FITTED ABOUT A WEEK AGO USING EXISTING WIRING -SHE GOT UP ONE MORNING AND THE LIGHTS WILL NOT WORK-THE OLD ALARM WAS WIRED INTO THE LIGHTING CIRCUIT AND THE NEW ONE IS NOW WIRED INTO THE RING MAIN

MY AUNTS LIGHTING CIRCUIT MCB KEEPS OPERATING - IN FACT YOU CANNOT SWITCH IT BACK ON - YOU GET A BLUE FLASH AND IT STAYS OFF- WHAT I WANT TO KNOW IS COULD THIS BE A FAULT WITH THE MCB ITSELF AND NOT THE CIRCUIT- HOW DO I CHECK THIS -I AM ABLE TO USE A MEGA-THANKS FOR ANY HELP-I KNOW THAT BULBS...

thanks for the answer

There was a banging noise coming from the drier as it spun around.I took the top off and found that a length of plate with a brush on the end had become bent and was hitting a recess in the drum .The drum has a band which runs all the way around ,which seems to be for the brush to run on.I bent...

THE GROUTING BETWEEN MY TILES IN THE BATHROOM KEEPS COMING OUT. THE TILES HAVE BEEN LAID OVER HARDBOARD FIXED TO THE FLOOR.DOWNSTAIRS HAS BEEN LAID IN EXACTLY THE SAME WAY WITH NO PROBLEM CAN ANYONE HELP. THANKS

IN MY BATHROOM 2 SPOTLIGHTS AND 1 SPOTLIGHT/EXTRACTOR FAN WITH A TIMER ARE BOTH ON THE SAME SWITCH , WHICH IS VERY ANNOYING WHEN YOU GO IN TO HAVE A WASH AND THE FAN RUNS ON AFTER SWITCHING THE LIGHTS OFF. I HAVE BEEN TOLD BY THE BUILDER THAT EVERY TIME I USE THE BATHROOM THE EXTRACTOR MUST COME...

Can anyone give me some advice in picking between block paving or inprinted concrete-the concrete looks good but the top coating chips off after time and the paving tends to need regular cleaning and weeding/weedkiller etc thanks Pete

Thanks for the reply Aiyup , i live in Manchester by the way. While on holiday in Florida i had a look at the air conditioning unit ,there seemed to be 1 heater/cooler unit and a grill in every room where i presumed ther was some sort of truncking attached. There is aiso a control unit situated...

Has anyone any idea how much aprox it would cost to fit air conditioning in a 4 bed house ,and does it heat as well as cool a room Thanks Pete