Search results

Fitted National front discs/pads to my sister's 2019 Fiesta over a year ago and still going strong. 01.2024 I fitted a Juratek front discs/pads set to my Bora TDI and over the past few months, with only 13k covered by the discs/pads fitted, started to get steering wheel shake when braking. Have...

The DTV/USB option had disabled itself in the source menu. My Toshiba freeview TV has the TV source option but no DTV/USB option so presumed it was the same source needed on the Technika TV. With DTV/USB enabled again, all channels are loud and clear. From what I've read TV source is for...

Likely!

I was quoted kit KP15503XS-2 by the Gates website for the engine. Belt, water pump and tensioner are in the box.

10.2019 reg, 1.4 843A1000 engine Does the engine mount, water pump, crank pulley or belt tensioner need new bolts when changing the belt?

Is anyone using this stuff? My niece had bother last week when a plastic spout broke off the stat housing causing a major leak. She got some bottles of Prestone ready mix for top up but ended up having her Fiat recovered. Engine is 843A1000. Still has three full bottles so figured getting...

I ordered a Gates brand stat housing which has all metal spouts. Gates part no TH42288G1 if anyone needs a replacement.

'69 reg 356 1.4 model The spout has broken off, presumably due to heat fatigue. The local Fiat parts say only the entire stat housing is available, not the spout on its own. Its got a hex collar so looks to be a screw in fit. Anyone know where I can get a new spout separately?

Apparently the reset is standby, info, menu, mute, standby pressed in that order but it hasn't worked for mine. LCD19-910

Even OEM are purchased from a pad/disc manufacturer, usually who the car brand can get a good deal from.

Have already had an aerial cable plugged in when adding the cable to the aerial. It did work but not now. Have tried the TV on the wall socket/cable I know works yet 'no signal'. There is a TV reset in the Picture sub menu, just reset with the OK but not bringing the aerial feed back to life...

LCD19-910 model No signal for TV in the menu. I had the TV back off and tested with a meter. From the edge of the pcb, pin 1 has continuity to the center pin and the socket barrel has continuity to pin 8. I've tapped the row of pins with the soldering iron in case of a dry joint but still no...

I get my TV signal from Pontop. According to Freeview for my post code, all channels from Pontop have good signal. I've read that a loft aerial can expect a 30% reduction in signal strength compare to an outside mount.

What's the general opinion of this RG6 cable product offering? Its states 1mm solid copper coated steel conductor 64 x .12mm aluminium braid Foam dielectric Aluminium foil shielding PVC Sheath Overall diameter 6.4mm Nominal attenuation @ 1MHz = 2.82dB 75 Ohm

Yes, the pixelation is across all channels when it happens, even with good signal. Having given it some thought, the cable I mentioned runs down in the wall from the attic to the the g floor room. The wall is the divider between mine and next door. The houses are wood construction and next...

I got a screenshot of google map, marking a line between the transmitter and my street then zoomed into my street and copied and pasted part of the drawn line to get the angle - about 10° anticlockwise from the apex of the house roof.

Having recently installed a new 12db gain aerial in the loft, I get around 85% signal and 100% quality yet the TV still gets pixelation. The cable in the loft and TV socket in the g floor room were already installed when I move in early 2022 so presumably installed when the house was built in...

I was considering running a cable for an upstairs TV but a signal splitter, even just two way, reduces the signal out to 50% of that from the aerial. Considering the price of decent signal amplifiers, may as well get a 2nd aerial so each TV has its own signal. Stacked vertically, I believe 2ft...

Which is likely to provide a better signal output for a given transmitted Freeview signal? The Raptor log-periodic OR this tri boom.

I visited a relative earlier today who lives in the same village as me. She has Freeview from a roof mounted aerial. Curious, I checked some of the channels on Freeview. Signal strength is around 51% yet the picture quality is excellent.