Search results

Ive been looking at a Honda IZY HRG 466 push mower and recently came across the Stihl RM 448TC for £40 more. Its self propelled and composite deck. I know Stihl are generally decent. Which would people recommend? Or are the any other suggestions? Thanks

Which make would people reccomend? I see there are old post of the same question but I thought it may be worth asking an up to date opinion. We're thinking either Worcester Heatslave 2 18/25 or Grant Vortex pro 26. I understand that Worcester after care is far better. I wonder about the EV...

Hi I am about to order a new oil combi boiler and installation, and I am confused over what size boiler. I got three quotes, two of which quoted in person and said two different sizes. One suggested 18/25 and the other a 26/35. Putting aside the cost difference of the boiler, the engineer...

I have a Hyundai 510sp lawnmower that is surging and I can't figure out what's wrong. I've cleaned the carburettor about 5 times with carburettor spray and enlarged the 2 valves slightly with a micro drill bit. All the little holes are clear. It was fine last year but I did leave fuel in it over...

Hi Is it possible for a DIYer to replace the flexi hose leading to the EV on a grant vort pro boiler? I tried to reenergise the EV but it won't let any air in. The hose does look a bit twisted and knackered. What would I need to turn off and release etc.? Thanks

Hi Sorry for another expansion vessel question but I can find this asked previously Had my boiler service yesterday and the engineer said it is full of water and it needs to be drained. He didn't mention anything about having popped. I pressed the valve and zero water came out. I replaced the...

Hi Does anyone have any advice on what I should do. Had my bathroom refurbished about 2 years ago and the silicone in the shower cubicle does not want to stay sealed. The fitters attempt looked neat but did not stay long, I've done it 2 and 3 times, the last time being a generous and neat job...

My neighbour has recently laid the blockwork for his new patio and it probably about a 1m high at our boundary. It's on sloping ground so probably less than 300mm above the ground at the other end. It's not ideal as they can see in a lot of our garden, but not all. I don't want an argument with...

Hi Does anyone have any advice for applying Rocktop on painted MDF? Should I lightly sand the surface before applying and then in between each coat? Thanks

Hi I just completed the first Topcoat on my recently completed MDF entertainment unit and the graige-ish kind of colour turned out to be bloody pink, sort of a pale cooked salmon pink. It's there is rule of thumb as to what colours would easily go over this, obviously not too dark? Thanks

Hi I've just built a MDF entertainment unit that I considering coating in Polycrylic paint, is it worth it? They'll be a lot of banging on it by the children.

I am almost there with my self build entertainment unit and noticed today a issue that I was hoping wouldn't (wistfully) wouldn't occur. The inner vertical of the shelving units on either side are causing a slight bowing of the counter top. The counter top is 2x18mm boards and the verticals on...

To those boiler installers out there, if a customer asked you to install a boiler somewhere that you knew would block as aspect of the regular service, would you do it anyway or refuse? What would the regulating body do if a complaint was made to them on this?

I'm about to begin painting a newly built entertainment unit made from Medite (if relevant) MDF. What paints would people use, they'll need to be hard wearing as the kids will also use them for toys. Thanks

My oil boiler is producing black smoke and soot. Didn't really notice it but as its on more it's pretty clear and getting everywhere. The soot has been fine but last night it produced relatively bigger chunks for a period, now they're back to small. I have a service booked for Tuesday, does...

How would people suggest I cover up the architrave in the photo below? I dont want to see it all, I'd like a totally flush door. Any special filler or will it just crack? Thanks

Hi About 2 months ago we had a neat fitted and UFH with its own thermostat. The CH did work when it was first installed but with it being summer it was left unused. Now the Nest does not appear to be firing up the boiler. The green dot is on the heat link which means they're connected. The UFH...

Can anyone recommend a pressure limiter to use with a water softener? The instructions say if the pressure is above 5 bar, limit it to 3.5 bar. I've told the plumber several times but he hasn't done it so I plan to buy it and give it to him to fit the next time he visits. Thanks

Hi What thickness of MDF do people recommend for a storage unit. It will be self supporting off the floor and fit onto a end wall measuring 3m x 2.4m. The base unit including the circulation space behind will be about 600mm deep, the cupboards and shelves etc. above will be set back and total...

I need to lay engineered board on top of concrete which is over old foundations. It's a strip about 500mm wide, then a step to one side and the original timber flooring on the other. The majority of it is very old concrete, some more recent where a wall was recently demolished and levelled...