• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

Search results

  1. C

    Faulty Radiator??

    Hi I have 1 radiator that really only gets warm. I have tried taking off the TRV, and manually pulling up the pin, but still only just warm. Its been bled+bled and bled. All the other radiators get hot quite quickly, exept this one. I suspect either the rad needs flushing, or is knackered...
  2. C

    Changing to Combi

    Hi Is it possible to change from a Central Heating system with a Hot Water Cylinder, to a Combi system. The boiler needs replacing on the property I have, and I am also considering a Loft Conversion, so I want to get all the water tanks out of the loft. If it is possible is it an expensive...
  3. C

    ??New boiler or not

    I previously posted about hot water not working on my Heatslave 9.24 combi boiler. I previously had the diverter valve cleaned out, and it worked ok till yesturday. I wanted a new diverter valve fitted, but I have been told that is a waste of money and the gas fitter I have spoke to says its...
  4. C

    Sink drain problem

    Hi My bathroom sink, continually takes ages to drain out, more apparant when I try to fill with hot water, as I have a combi boiler, and when the water has got hot and got to the sink, the sink is almost full!! It appears that it is actually a plastic cloakroom sink, fitted before I bought...
  5. C

    Hot Water Not Working

    Hi I have a heatslave 9,24 combi boiler. The hot water has stopped working, more particularly in the mornings. I hear the water running through the bioler, but it does not fire up. I suspect it is the diverter valve, but can anybody clarift this suggestion, and if it is, how much would you...
  6. C

    Door Sizes

    Can anybody help I want to replace the internal doors downstairs in my house. The problem is that all the frame heights are around 1960mm, and all of the doors I have found are 1981mm height. (preume standard). I intend to use solid pine doors, but am I safe to plane approx 10-12mm of each...
  7. C

    New door sizes

    Hi all I want to replace the doors downstairs in the house. The problem is I appear to have small frame heights, around 1960mm. All the doors I can find are around 1981mm height. I am not sure if its safe to plane or cut off so much from each end. I will be using solid wood doors, not...
  8. C

    Tracking and Steering Wheel

    I have just had 2 new front tyres fitted to my car, A Nissan Almera Sport. I also had the tracking checked, and was told it was out, so I had it adjusted. Now when I am driving stright, my steering wheen is rotated to the left, and the car has a tendancy to wander a little to the left also. I...
  9. C

    Electric Shower Flow

    I have had an electric shower fitted, a gainsborough 10.5KW. The problem is that its either scalding hot, or stone cold. I have had gainsborough out, and they have said, although I have 2Bar pressure, I only have 4L/Min at the shower, but 17L/Min at the cold taps. Does anyone have any idea why I...
  10. C

    Hot Water Intermittant

    Hi All I have a combi Boiler, and most of the time works OK. intermittantly, usually in the morning, when I switch on a hot tap, the boiler clicks, and I can hear water running through the system, but the boiler fails to light. When this happens the central heating works OK, and if I turn up...
  11. C

    Mixer Shower

    Hi I have a Mira Mixer Shower, and when used it only ever gets luke warm no matter where the temp guage is set. However, when I turn on the cold tap on the bath a little, the flow reduces, and the shower getts hotter, the more I turn on the cold tap, the better it gets until all hot water...
  12. C

    Dropping PRessure on a Woucster Heatslave

    I have a heatslave 9.24 I managed to find the filling loop as the pressure was always low, and filled it to 1 Bar. When the central heating is running, the pressure goes up to approx 1.2-1.3 Bar, but when the system is off, the pressure still drops to around 0.6Bar. Is this right, or is there a...
  13. C

    Draughts

    I have just bought a house with single glazing all round. I have noticed many draughts coming from the windows and doors also. Id it possible to scrape out most of the old putty, and re-seal the internal sides of the windows, with either new putty, or some other kind of sealant. Also what is the...
  14. C

    No hot water, but CH works!!!

    Hope someone out there can help. I have a woucster heatslave 9.24 combi boiler, in the house I have just moved into. Today, although the central heating works fine, when the central heating is not running, (thermostat switched off CH), when I try for hot water the boiler refuses to fire up. I...
Back
Top