Search results

Hi, My outside door has 3 "Zoo" hinges, The door is scraping at the bottom and needs a slight adjustment. But, I thought I just needed to remove the end caps to get access to allen scrtew for adjustment. NBut I cannot remove the end caps, so I am not sure I am doing the right thing. Picture is...

hi all Thanks in advance. I recently moved to a new house. It's 2 years old. Downstairs there is underfloor heating and 5 Heatmiser slimline thermostats in each area. Upstairs are radiators with trv's Also upstairs is one Honeywell T4 thermostat. I have programmed all the downstairs...

Hello. Model number is WTL6305GB Last week the heating element of the drier stopped working. When I removed it, it was fairly damaged with the spacer for the coils disintegrated. Tried everthing else before removing the elemet. ie cleaned fluff filter, empty water tank etc. I had similar...

Hi all, Hope you can help before I start ordering expensive parts. Just recently the hot water temperature fluctuates every 30-60s or so. This happens at every tap/shower. I checked the boiler and as hot water demand comes, the boiler is firing up., Then eventually the boiler switches...

Hi, I have a worcester bosch 28iRSF. Recently it has started to give intermittent hot water, particularly noticeable when having a shower. It also seems to happen more when the CH is off, but this is not exclusive. I have replaced the flow turbine and the thermistor, but this made no...

Hi, Model is: SGS5362GB. It was running a cycle then when I went back to it it was not on. Fuse checked ok. When I activate the drain microswitch, the pump turns etc , so there is power going to the machine ok. Checked the door switch etc ok. Tried the "re-set" procedure. No good...

Bulb has blown and needs to be replaced. I cannot remove the glass cover. I can remove the glass cover in the grill - no problem, but the glass cover on the oven will not come off. It seems as if it is stuck onto a thin metal ring- when you try to unscrew the bulb, this metal ring is also...

Hi, I have a bathroom mirror with two fluorescent bulbs. One of the bulbs is not working so I bought a new bulb. New bulb also didnt work, so after swapping bulbs and starters, I have now narrowed it down to the transformer. The manufacturer seems to be "AD". Type is T2 Z-P130. The bulb is...

Hi all, I dont know the make or model of my shower. I think the cartridge needs replaced. Can anyone help to identify it ? The tip has 24 splines and is around 10mm dia. The other bit with splines is around 23mm dia. The diameter of the main body with the thread on it is around...

Bosch Exxcel condenser drier - WTL6305 First problem was that the unit was tripping the electrics for the whole house. I had this before and the simple fix was to clean all the fluff from the inside. (basically the drum was shorting to the casing). However, after all the cleaning, 10 mins...

My mixer shower installed a few years ago has had to be gradually had the temperature increased on it just to keep it at the same useable temperature. I took it to bits to have a look but cant really see what to adjust. Pictures are shown. //www.diynot.com/network/Tbone/albums/ All...