Search results

Hi, I hope someone can help and recommend which resin to use for a disaster! The problem: Plumber was fitting a wall bracket for a vertical radiator into wall and has completely destroyed the breeze block behind by drilling 3 holes too close together. Which resin can be used to fix...

thinking of removing a stud wall where a staircase is on one side and replacing this with a timber framed book shelf, floor to ceiling. Is this possible as the staircase is next to this wall? The house is only 2 floors. Thanks!

great, that would work then !

Hi, as the Potterton Promax FSB 30 HE has a pump, can this pump the condensate 5.7 metres away to the drain? I would use the existing 3.5m 100mm tube connected to some kind of upvc leading to the main waste pipe in house. thanks!

also, if I move the boiler down to base cabinet level, the flue will go directly outside at about 400mm from pavement level - would this be ok with a flue cover? thanks!

thinking of replacing the potterom to this http://www.glow-wormheating.co.uk/products/all-products/sealed-system-boilers/flexicom-sx/flexicom-sx.php how much would this roughly cost to move it directly down 700mm or moving the potterom down the same distance? No pipe work to be relocated...

hi I have the Potterton Suprima, just checked, can this be moved down into the kitchen base unit (under the worktop) with the flute going outside at floor level? thanks!

is it possible to move the boiler into a base kitchen unit, rather than being in a wall unit enclosure? Thanks!

thanks again! ok, the main water blue pipe coming into the house, can I somehow lock this off while it is repositioned? The stopcock is also attached to this.

thanks, just to clarify the waste pipes from dishwasher, sink and washing machine would run 5m along behind the cabinets then into the a vertical waste pipe in the corner of kitchen connecting upstairs loo and then under house into drain.

I am planning a kitchen refit and want to relocate sink, washing machine and dishwasher. Currently the 3 are right next to (max 1metre away) waste pipe and water supply. I want to move the sink, washing machine and dishwasher roughly 5 metres away, the service pipes can go behind the base...

hey matty or anyone else, my carpenter installed the 18mm ply over my enitre ground floor with sisalkraft underlay. I told him so many times to line the walls by 100mm of underlay and he hasn't on many parts. Also a lot of the boards don't sit level, he said that some of the ply-sheets had...

I want to remove all the old existing wood spindles and wood newel posts from my staircase and replace them with glass/stainless steel setup - would I be compromising the structure of the staircase by doing so and is there anything to be weary of? cheers!

cool cheers!

how much would 1 charge for something like this? I am getting a quote tomorrow from a plasterer, don't want to be ripped off!! london based also

oh the door is for the lounge - the door is the same as all the other doors in the house, solid oak. I think they made the frame that big because the builders couldn't be bothered to plaster that part. Door size is normal single sized opening.

Hi, I have just taken down a door frame, dimensions 300mm x 2000mm. This has exposed brickwork and above the door frame are loads of plaster bags stuffed in to pack it out :? I want to get this plastered over with no door to be replaced, how long would it take to do a job like this...

Hi, about to install some moistop underlay on the sub floor - around the floor are parts like recessed french doors which have awkward corners. How do I get round this by not cutting into the underlay?