Search results

Hi, Looking to replace a radiator which had a leak. I've closed the lockshield valve and the manual control valve and opened the bleed valve. I've manage to undo the union nut on the manual control valve side and drain the radiator but the lockshield side nut is not moving. I'm...

Need a flexible tap connector but having severe trouble finding the length that I need. They all seem to be 300mm. The kind shown in the link is what I'm after, but with a 12mm thread connection to the tap...

Morning all. Recently the flexible connector to my tap was leaking. Disconected it all and say the tap was also corroded (was a cheap tap). Have purchased a new tap and new connectors but they are 300mm and not long enough (connector screws onto the hot/cold pipes and has a 12mm thread...

Evening all. Kitchen refit planned, the old extractor fan was plugged into a socket which was high up on the wall (hidden by the cabinets). The new cooker hood has arrived and is not fitted a plug, to be honest, the socket location would mean that any plug is visible so I'd rather not go...

Evening everyone. I have a replacement bathroom suite purchased (Bath, Pedestal Sink and Toilet) which is like for like with my current suite. Will also be having a towel radiator (I will be supplying) installed in place of the current radiator and replace the electric shower (I will be...

Replacing the sink in the kitchen together with the taps (and the whole kitchen but that's by the by!). Anyway, I can see the bolts that are connecting the hot & cold feeds to the mixer tap but the hole underneath is about 4cm x 3cm and I'm completely at a loss as to how to get them undone...

Afternoon everyone. Currently redoing my kitchen and there is a wall lamp (like the top of a cheap desk light) attached to the wall at about head head. Really want this to go and wonder what would be required with the cabling? The light currently has it's own switch (3 switches for...

Posted this in the appliance Forum but think it may be more applicable here: As part of a kitchen refit, I'm planning on moving the washing machine from it's posistion beside the sink to the opposite wall. The waste inlet is currently right under the sink so I wonder if anyone can advise...

As part of a kitchen refit, I'm planning on moving the washing machine from it's posistion beside the sink to the opposite wall. The waste inlet is current;y right beside the sink so I wonder if anyone can advise if it's as simple as running an extended waste pipe round the edge of the walls...

Afternoon folks, Currently looking at refitting my kitchen (2600mm wide x 5000mm length). The oven is to be a straight swap (in middle of the 2600mm wall) but the corner units I'm looking to get are 900mm each. Add in the normal 600mm integrated oven cabinet, I'm looking at a 100mm gap at...