Search results

Hi, I want to request a copy of the surveyor report that was completed by our window fitters surveyor and any fitting notes they may have. Can anyone tell me answers to the following. 1) Am I within my rights to do this. 2) Do they have to give these to me or are they simply their own records...

Hi all To cut a long story short our GRP roof was damaged while replacement windows were being fitted, effectively due to the roof not being supported when the window was replaced. This support was needed as there is quite alot of gravel on the roof so weight bearing down on it. As part of the...

Hi all, a few weeks ago the following 3 things started happing almost simultaneously. 1) Hot water became constantly boiling hot. 2) 3 port valve in airing cupboard starting making humming noises. 3) Boiler would cut out randomly and would need re-setting (Potterton Promax SL version 24)...

Hi, looking for some general advice on whether a quote we have been given is excessive. I live near Brighton and had a problem with the hot water and central heating. The conclusion from someone that has come to look at it is the 3 port motorised valve which is in the airing cupboard needs...

I currently have a single socket which has three wires going into it. Two I presume are the ring main and one is for a spur leading off to another socket. It is all RCD protected at the consumer unit. For various reasons I want to get rid of the socket itself but keep the wiring in place...

I want to install a gas stove in our living room, one that is meant to look like a multi fuel stove but isn't. The gap in our chimney breast is only 470mm wide and even the smallest stove is about 400mm wide. A lot of these stoves say that you should leave a gap of at least 150mm each side of...

We had our boiler serviced about 6 months ago and the engineer set what I presume is the stat on the front of the boiler to 2 out of 5. He said it should never really need to go any higher than that. Last night we realised the heating was not working. After further inspection we worked out...

Our old Landis & Gyr RWB2 programmer would not let us have the heating on without the hot water being on. I thought this was because of the programmer itself so I bought a digital Seimens RWB29 that goes on the same backplate to replace it in the hope it would give me seperate control of both...