Search results

Hi All The bathroom tiles next to the bathroom door have come up a bit making the door scrape when opening and closing. Just one tile mainly 7mm or so but the other 2 have come up also very slightly be couple of mm. I sanded the door down to allow it to glide over which it did for a day but...

Thanks so i guess it's a case of getting another hard wired unit and wiring it in as the easiest option rather than plug version.

Just looking for easiest solution really

was just looking on currys to be fair and £150 Logik and £200 kenwood need hardwiring as prices go up hotpoint etc come with plug

Thanks thomp1983 had a look behind, nothing directly behind but there is a really long electrical cable that runs behind couple of cupboards to the right and then into the attached pic. I guess this would mean pulling the cupboards out as in very awkward place. Or could you cut the wire and...

what should i be looking at for install cost or is it easy enough to do myself if just replacing ?

think I found an old link that says current one is 13 amp https://www.a1appliancecare.co.uk/product/whirlpool-built-in-electric-oven-in-stainless-steel-akp-206-01-ix/

Pics attached one of socket and one of current oven details

Hi All Our single oven which is hardwired has died. The wiring goes to a cooker socket as shown in attached pic chased in through the wall from underneath. New oven and I think the majority on the market come with plugs, I think only a couple of budget options like kenwood at currys might...

Thanks all managed to do it, just used this article and scraped the connectors on the circuit board and seemed to sort it.

Thanks maybe your right £40 it is, hopefully it doesn't turn out to be the electrics

Brush and wd40 didn't work unfortunately. Found this article which may be worth a try? https://polarclouds.co.uk/dt90e-repair/ The digital programmer is lit up And working fine just the room stat that's dead. Does that mean anything by way of electrics are fine?

How would I check this to rule it out?

Yes I believe its just 3 coloured wires from memory, can it be replaced with a manual one or best to do like for like

The stat is wired.. I tried two different types of batteries checking they are in the right way before inserting still blank and didn't go faint before disappearing that I am aware of. I'll try cleaning the terminals with brush and wd40 as you suggest and let you know if worked.

Hi All The screen has gone blank on our honeywell digital thermostat (pic attached), I've changed the batteries but nothing. Any ideas what it could be and if a replacement is required is it easy to replace? Many Thanks

Yes sorry guys I must of done that, just replicated a couple of times it s only the far right one {pic attached) Must be the post Covid issues I'm having Anyway binning the radiator. Thanks All Much Appreciated

All of these (attached) were down

I'm pretty sure I had to reset all of them including the big one as I heard various things coming on as I fired up each switch.

Yes all of them not just individual or just those related to upstairs etc