Search results

held in by locktite- heat up with blow lamp and hit to shock free

Check carbon brushes

Pump partially blocked or associated pipework

Take transit brackets/bolts out read the manual for this-forgetting could write machine off

brushes,try a search

Module shouldnt affect fill to machine-fill is done with valves pressure switch and pump

Ive been repairing appliances for 23 years and avoid built in if possible.For a basic dishwasher not too expensive go for whirlpool with electro mechanical controls-hope this helps.

Sounds like pressure system fault

Its not pumping as quickly as it should- check pump/outlet for blockages

Almost certainly flame failure device (ffd/fsd) -look for price of component on net before scrapping appliance

will try National Refrigeration supplies in Cardiff

Trying to source condenser fan motor for Osborne two door bottle cooler, no model or serial number on appliance,any help appreciated

theres a stat located top right of door opening

If its frost free type ,check for ice down back of freezer section as build up can foul fan blade

Could also try removing flow restrictor

Hot water thermistor?

Its a thermal fuse which can be replaced but is difficult for diy as soldering in place can cause fuse to melt-if you replace element it comes with different stats on new one

Suggest you change both sensors

Sounds as though machine has leaked into base and as activated anti flood switch in base of machine

The thermal cut out has gone open circuit-this is part of the heater element situated at back of machine behind metal panel