Search results

Can anyone suggest a basic rain sensor autocloser that I could retrofit to an existing top-hung Velux window? The only ones I can see on the Velux website are for centre-hung windows. Ideally, the window would be opened manually, and close automatically if and when it rains - so no need to...

It's coming from our underfloor heating circuit, probably in the ceiling void between the ground and first floors, and is amplified by the pipes passing through a cavity wall into our garage (where they then drop down to the UFH pump and manifold near ground floor level). It's a rapid rattling...

Thanks. Should I leave an air gap between the celotex and the cold wall?

28-30 degrees centigrade, in our case.

We have an airing cupboard where the right hand side is constructed against an external brick cavity wall (uninsulated). There is a 40W electric cupboard heater at the bottom of the cupboard, which ought to be enough to keep everything nicely warm. However, the air temperature doesn't rise above...

Our roof used marine ply - square edged *not* T&G. And it still made noises. I'm no expert but I wouldn't expect there to be too much movement along the joins between the ply panels if they are properly attached to the wooden joists/fillets or whatever. Isn't it more likely to occur where...

:shock: You should talk to someone about these urges...

Beware - even "warm" LED lights can be as cold as a Vladivostock fish canning plant on the nightshift. Traditional incandescent picture lights - or warm fluorescent tubes - hidden behind a vertical wooden strip would be much cosier.

Why not go to the seller's house, compare their door size etc with yours, and have a go at moving the sofa to see how well it works?

We stopped using powder in our washing machine a few years ago because it was regularly blocking our drains. We switched to liquid (Waitrose essential, plus Comfort fabric conditioner). But I still need to rod/jet them about once a year, removing long chunks of white, waxy blockage. The...

Based on my experience, I'd say give it a year or two and see if it settles down of its own accord, before doing anything drastic/expensive.

Thanks for the advice folks. For the record - in case anyone can benefit from a review of my experience - I decided to use Acrypol+, on the grounds that it was the simplest solution. The best price I found, with next day delivery, was from an online UK roofing superstore. This worked out...

Our garage flat roof is made of 100mm thick concrete (1950s) which tends to leak where it butts up against the side brick wall of the house. I repaired it 15 years ago with a 45 degree mortar fillet about 100mm wide (front surface) - but now this is leaking in a couple of places from cracks...

FWIW we got a GRP flat roof as part of our extension, completed late 2012. During the summer of 2013 we heard regular loud bangs of the sort described as the roof cooled down on hot days. The good news is that during (what passed for) summer 2014, we have heard no more noises, which suggests...

These are three BRILLIANT ideas - I hadn't thought of any of them so many thanks! I will look into each of them. Any more bright ideas would also be really appreciated - can't have too many, and it might will help other people with similar problems. Thanks again!

Due to a lack of workshop space I have to find a way to store my 200+ stock of 2x2s, wooden trim, copper pipes, curtain rails, carpet trim etc. *outside* of the house. I'm talking about long thin stuff here - not boards. A lot of it is in 8ft lenghts but there are offcuts that are maybe only...

Thanks - anyone else got any views?

It was about 3:1 in favour of grooves if I remember right. However, I don't want to have three quarters with grooves and a quarter without, so I'd really like to understand the pros and cons so I can factor them in and make my own mind up!

Hi It's been a while since this has been discussed, so I would like to ask everyone for their views on whether I should buy smooth or grooved decking for our back garden (west-facing). What are the pros and cons of each, and the implications for maintenance, safety etc? Thanks!

Screwed from underneath into the brackets, to stop them moving around (and falling off, in extreme cases). You would need to add some rigidity because the brackets will want to sway from side to side. 600mm is a very deep shelf - if it really needs to be that deep then FlexiShelving is...