Search results

Hi yes Looks like I got 3 Honeywell home motorised valves.

Forgot to say the underfloor heating is controlled by a heatmeiser controller.

Hi all Moved into a 4 bed property where we have a 35kw system boiler that has a hot water tank which is controlled by a hive controller. Also have a manifold which serves 2 zones one for kitchen and one for utility. The schedules are all separate , no overlaps. Thing is when we use the...

There is a connection from COM to L2 should that be left in as well?

This came in the pack too- not sure if I need this?

Hi, it’s a humidistat mainly for the shower so not fussed about it coming on when the light is turned on, want it to come on when the humidity is high.

Hi I am installing a fan but the wiring isn’t well documented on the instructions. I have wiring as per photo1 on the isolation switch on the outside but on the fan itself, there is a L, N and T. When I isolate/turn off the switch, no power comes in. When I turn it on, there is power to the...

Hopefully this is ok?

Hi no just want to have 1 x led dimmer 2 gang 2 way and leave the other normal 2 way switch Will send a photo of wiring shortly …

Hi everyone I have a 2 gang 2 way light switch controlling 2 lights from either side of the room. This has the usual Commin L1 and L2 ports. I have a 2 gang 2 way led dimmer which has ports Sw L and x - I say x because it’s like an arrow with a wave through it. Wondering how I can swap the...

Hi im getting the garden patio relaid and want to put in an LED border around the edges of new slabs- about 65meters. I have a power source internally where i can power the LEDs, but wanted to see if there are any recommendations/brands to avoid, whether i need waterproof channels or if some...

Ah yes sorry get you now. I wrongly assumed the double check valve had an iso in there. Internally what would I fit first from the main, the double check valve and the iso before it goes external?

thanks guys. got a double check valve ready to connect to one of the existing pipes. the water is mains fed not tank fed. the second iso valve you specify above - whats that one for if i already have a double check valve?

Hi all Wanting to get a cold supply of water to rear of garden that’s about 20m away. I have a down stairs shower room where I’m hoping I can tap into the cold water supply and feed outside with a iso valve maybe on the inside in case I need to cut off the water but was looking at the thermal...

Yes thanks that’s worked fine.

Thought so- just wanted to make sure. Will let u know if it works

Hi I have 2 sets of lights that are controlled by 2 different switches (2 gang 2 way) from each side of the room. One set of switches, they are all in the “off” position. The other side, 1 switch is off, the other switch is in the “on” position but the light is still off. So in effect one side...

Thanks got it working now. 34 en50131 is disabled 53 pd6662 is off Thanks everyone for your help again.

I had lost a lot of settings about a month ago so had to reconfigure a lot of it. So arming displays when in progress but when armed we used to see the message like “full arm” or “evening arm” but handy when you know it need to be disarmed? Will see if I can find the area settings, thanks.

Hi Got an issue where when I arm my system, full arm or part/evening arm, it works but doesn’t display this on the lcd. It just shows the date and time. Not sure how I’ve lost this but only noticed recently, does anyone know how I can get this back on pls? Thanks