Search results

  1. M

    shower install - some advice please

    Hey all so I’m doing my first shower install (I’m refurbing my house - I’m not a pro) and I’m a bit stuck on how to connect the rain shower to the pipework. Apologise in advance if this is all basic stuff. the shower I bought didn’t come with installation instructions, and unsure what type of...
  2. M

    Where have I gone wrong? Bathroom light/fan

    so it’s all fixed... looks like I made an amateur mistake... labelled the wires incorrectly on two of the wires. Circuit worked all fine once fixed
  3. M

    Where have I gone wrong? Bathroom light/fan

    Yeh, I’m back there on Sunday so let’s see - will remove wires first and re check it all. After seeing Comments I think I’ve probably labelled a wire incorrectly. will take pictures on Sunday if I still have issues of all connections
  4. M

    Where have I gone wrong? Bathroom light/fan

    And yes the fused unit has a switch - just standard fused switch with a 3 amp fuse inside
  5. M

    Where have I gone wrong? Bathroom light/fan

    Cool, yeh will buy a multi meter and check. the wires are relatively easy to remove so might recheck everything first. I’ve not used a multi meter before - but will figure it out. If there’s anything should look for let me know
  6. M

    Where have I gone wrong? Bathroom light/fan

    Com and L1 com is live L1 is switched live
  7. M

    Where have I gone wrong? Bathroom light/fan

    The only other thing I can think of is I might have labelled the wires incorrectly, so might need to pull the wires out again and double check that. fuse is ok, - I’ve plugged the light on it’s on directly to the fused switch, and it turned on and off. Wagos I think are joining type, they have...
  8. M

    Where have I gone wrong? Bathroom light/fan

    Connections are only indicated by circles or shapes, lines overlapping aren’t connected in my sketch
  9. M

    Where have I gone wrong? Bathroom light/fan

    I’m wondering if I need a three pole isolator? I’ve just used 3 amp fused switch and a regular light switch at mo
  10. M

    Where have I gone wrong? Bathroom light/fan

    The two circles on my sketch indicate waygos
  11. M

    Where have I gone wrong? Bathroom light/fan

    The issue is light or fan is not turning on at all... even though a current is detected (using detection pen)
  12. M

    Where have I gone wrong? Bathroom light/fan

    Used waygo temporarily as the cable was a bit short in a couple of places. Once everything is screwed in, I can remove waygos. But there’s two places where I needed to connect neutral from fan and light, going to fuse box. N going into fuse box is based on the diagram / instructions that came...
  13. M

    Where have I gone wrong? Bathroom light/fan

    Hey all I’m adding a new shower encloser. The shower will have an all in one light and extractor fan. I know it’s a mistake I’ve done somewhere but can’t figure out where I’m going wrong. see my sketch of the circuit diagram. Also attached diagram of how circuit should be from fan extractor...
  14. M

    New metal chrome socket not working, but plastic is

    My house has been recently updated with new wiring for additional power sockets. I've been trying to install two new metal sockets in a particular room but they don't seem to be working. What can I be doing wrong? 1. I've installed a plastic faceplate and it works fine - but cannot figure...
Back
Top