Search results

Update.... Spin is working but keeps causing the machine to stop and lights to flash. Any ideas what might be causing these things.

After some further advise please... I've changed the brushes as the old ones were worn right down. Drum now turning but is making a whirring sound and when it got to spin cycle it struggled to go round. Have turned it off. Any ideas...

WOW... what a fast response, thank you. That makes sense, for a couple of weeks now the cycle has been stopping mid cycle so sounds like it might be the brushes. I've just had a quick look on you tube and looks relatively easy to change them.

Drum stopped going round so took back off and the wheel attached to the back of the drum that has the belt on has what looks like soot on it. No burning smell so took belt off and it looks ok, any ideas what the problem could be... thanks in advance

Thanks... will order one tonight, good job they are cheap if they are only going to last a year!! Perhaps just been unlucky...

Basic fan assisted oven not heating up... only 3 years old and we actually changed the oven element around a year ago. Grill is heating up and fan is coming on, it's just the oven not heating up. Red temperature light is on. Has the element gone or is there something else it could be? I...

I don't see that as relevant to my original post so why post the comment. To clarify, the boiler was checked and fitted by an OFTEC registered heating engineer who has been looking after our oil boilers for 15 years.

Thanks anyway... will give the guy a ring.

Thanks... tried that before I posted. Sadly this didn't encourage any heat in this one radiator...

Yes the other valve is open and the pin requires pressure to push in.

We recently had a 2nd hand oil boiler fitted and all the radiators are working fine except our bedroom, which is furthest away from the boiler. We've bled it and the pin in the TRV valve pins are going in/out ok. The inlet pipe below the valve is getting hot but the radiator is stone cold all...

I've only very basic knowledge really, hence not being very brave at tinkering. Only know what I know from having a temperamental oil boiler for 10 years and watching and listening when my boiler man is fixing it. I'll have a look at it tomorrow since it's in an outhouse and the lighting is...

Thanks... Yes it's the overheat button... Not sure I'm brave enough to check it myself though, will ring my boiler guy.

Pressure is fine, I've just managed to reset, boiler fires up but still no hot water or heating . Then after a while it pops out again. Could it be the pump?

It's not locking out but the reset button under the top has popped out and stay on. I've turned it off and will have another go but any ideas would be great.

Thanks... I was hoping I'd located the problem :( The engineer is here now and he's now saying the expansion vessel is full of water ? I'm really hoping he's located the issue, I'd rather the pressure loss be a problem with the boiler rather than a leak god knows where in the house!

I started a thread about my boiler losing pressure, can't find any obvious leaks in the house (although I appreciate that doesn't mean there isn't one). Engineer came out and said there are no leaks on the boiler. I've lifted the top of the boiler off and there is water dripping very quickly...

Thank you... that's great. I'm not even a DIYer just looking for some ideas before the engineer comes back in the morning. Boiler is in outhouse so no obvious leak in PRV. No obvious water in boiler. I'm presuming he checked the vessel when he looked quickly yesterday. There is no water going to...

Bumping in the vein hope that someone might have any suggestions...:(

I'm just looking for any ideas please before I call the engineer out again... Worcester combi boiler started losing pressure, so topped it up again and all ok we had hot water again. However over the last week the pressure keeps dropping to nothing on the dial and not hot water. We have to keep...