Search results

Already had them years ago when a friend got rid of their boiler The repairs i have done over the period are new diverter valve new pump and new flame sensor Just need pointing in a rightish direction obviously if gas valve will need an engineer but at the mo cannot afford Just as a side...

Hi Guys I have another problem with the above again. HW i get the red light saying it is asking for hw but no hw CH no heat but seem to operate as should all clicks seem to be there pump seems to be spinning the what i presume is a gas actuator moves, no flame no ignition and no lock out...

Hi DP A camping stove and a billy can would be a better boiler And thank you Cowley pump replaced nice toasty house and a happy wife

Cheers I see what you mean Thanks again

Thanks for your reply Yes that is correct I loosen the centre nut pull it out and can rotate but cannot feel it running, I take it the head is the impeller and not the electrics

Hi All I have the above combi old and rubbish i know Problem HW OK CH not working, I changed the wax capsule in the diverter a couple of years ago and that sorted my last problem, and this seemed similar until i started to look into it. The air vent at the top whilst not tightened down had...

Had the time today to change the wax valve I followed the system for draining the boiler down spilt the diverter removed the end plug pushed out the wax valve swapped orings and washers replaced the fibre washers for the for the two pipes feeding water into the burner I now have a small leak...

I understand what your saying gasguru but if you forget to wash your hands before starting work you are not really in danger of the boiler blowing up. Each have there own pitfalls Dave

i work on valves for a living but they are medical oxygen with 300 bar behind them not CH with hot water. working on valves is not an issue just dont want to get covered in hot water, just unsure of what is behind what opening and what happens if i open a port Dave

http://www.euroboilerparts.co.uk/dv410-potterton-puma-wax-capsule-1020351-929651-ideal-172422-164-p.asp is this the correct bit Dave

Cheers Gaz Just how does the wax valve work and do i need to drain to fit Dave

been round and checked and there are no dripping taps hot or cold Cheers

sorry puma and pump seems to be working

Hi all Hope someone can help Firstly the problem The CH comes on for a few seconds then goes off and repeats at random intervals some of the rads upstairs get warm/hot but not the furthest away the downstairs cold no rads have been adjusted other than the normal temp adjustment so balancing...

Hi CJR In my experience the answer is no, due to the anti tamper systems in place on alarms if the cables get cut/disconnected then the alarm box will sound until the battery runs down unless its solar powered then youre stuffed. best advice is find someone willing to go up a ladder and...

cheers rocks will give that ago. it may save me the price of a door handle as that has broken in half aswell. Dave

I have a problem and that is what substance do I use to reattach the door to the hinges it looks like a rubbery type substance that glues the door to the hinge. Thanks in advance Dave

YoGen Vocal Remover v3.1.0 try this

wow just about the best thing computing I have seen for a while. I would really love one

cheers for the reply smarty. I think that the pots are still open and the source of moisture could be shower, steam iron (a lot of steam is generated) the drier is vented to the outside. Dave