Search results

Morning all after a bit of help please. we had problem with the mid port valve a few weeks ago as the heating would not come on only the hot water. Engineer came out and replaced the top bit as it had burnt out. how ever the water in the tank is now scolding hot and the thermostat on the tank...

So wife told me waste pipe outside was leaking when emptying bath so i had a look its loose and not pushed on properly. Seems there it not enough space to push on the compression fitting. any help what to do here would be much appreciated Thanks Matt

Afternoon All can anyone help please ? i have Coll error on my sisters Smeg Oven and not sure what it means ? https://photos.google.com/share/AF1QipO_B67QMc2Ex4P89Jluu7LYePTohNF6UUzQURvkko8cV-JcN-Iv6x_ozYYGnWifeg?key=UGZ5Rm1hQXlUS2dMX1V2MUl3Vk5rSmd6SFY1S1pR

Morning All After bit of advice We were due a wireless thermostat fitting by a (unnamed company ) due to how my system is they could not wire it in needed a live feed After they went things were not right after they had poked around . boiler would not fire My dads a sparky although works on...

Ok so we bought 15 year old house that had a new bathroom suite in .Great or so we thought !! The floor looked great when we moved in after 2 Weeks the tiles have come loose and the grout is cracked .After pulling a few up its been tiled straight on to a dusty chipboard floor !! My plan...

So moved in to a new house 2 weeks ago now . Bath is flexing at opposite end to taps and is coming away from the wall. So i have taken the panel off to have a look. The legs were on tiny square blocks. I was going to run 3x2 from the back legs to the front . I have put a pice of...

Can i replace the danfoss cp15 with Danfoss FP715si Programmer. Will i just be able to just swap them ove keeping the same back plate ? Cheers

Need some help Bought a house that has a Danfoss cp15 programmer in But cant for the life of me figure it out without the instructions does any one have any ??? I can manual set the hot water and heating to come on but need to set up the programmer.

Can i dim mains gu10 bulbs. In the nursery we have a light fitting with 3 50w gu10 halogens . can i change the light switch to a dimmer and will they work ok ?

ive put a new radiator on. and screwed it the tails with pfte tape but the leak still. There not gushing water but if i rub my finger under the join i get water on my finger

I am wanting to put a radiator in the loft Was going to tee in to the flow and return pipes from the bedroom below is this ok ?

Right I have just nearly finished tiling just the bath panel to do. And i realise that when i come to put the towel radiator back on the pipes that come through the floor aren't going to move now as i they have tile adhesive and grout on them ? so when i put on the radiator i cant lift the...

Ok i need to take the bath room out to have it all re plastered . Im going to take the sink out later to get the tiles off behind. i was going to cut the pipes with a pipe cutter and stick a speed fit stop end on ? is this wise or should i get a compression end ?

Going to sort round the windows in our house its a 1880s Mid terrace with upvc windows. Do i strip the old silicone off and the paint then reapply the silicone Or do i strip the old silicone off use caulking then paint the job lot ? your help would be much appreciated ?