Search results

Yes I was concerned the zone programs may of been wiped but they seem ok. At one point I put my code in twice then pressed reset, maybe this just reset the code back to default ? I wasn't sure if when it was set if the zone lights for the set zones should display but I checked with next door...

Fixed - I put the new battery in but it was still the same. I had read that the master code/reset is 4321, so i thought I'd try that and it worked ! For some reason the code was reset, maybe with power being of for so long ? I've put my original code back in and tried the different zones and all...

Thanks, it is 21 years old, I'm going to Toolstation in a bit to get one

Thanks for the reply no, it does not start to set When you say panel battery, do you mean the battery in the loft ?

I had a power cut whilst i was at work, when i came home the light was still flashing, i put the code in and pressed reset, all was good. Now when i try to set the alarm by putting the code in I don't get the alarm set beeps ? Would a new battery help ? Thanks for any help

Old thread I know ! Does anyone have a link/information on how to fit this part ? Will it cause any problems if left ? Thanks

The remote I bought was a 433mhz keeloq rolling code remote, looked identical to my originals. Yeah the original that stopped working, the spring terminals are fine, I press the button on it & the red light flashes, it just wont pair up/register.

I phoned Cardale who just gave me the information that's in the instructions, Ansa was a bit more helpful but what they suggested never worked but was right in one aspect. Ansa said even though the replacement remote I bought from Ebay looks identical in everyway it won't work. I ordered a...

Thanks for the reply - To reprogram the remotes, I have to delete all remotes first, then reprogram them all together, only one of the remotes is bein recognised when I try to reprogram.

I have a Nov 2004 Cardale Thermaglide Roller Shutter, I have a problem with the remotes. I use 2 remotes, recently both have been intermittent so I thought Id change the batteries but was still the same. I then thought I'd reprogram both remotes, now one works perfect but the 2nd won't...

Thanks for the reply We have done a full defrost, we left it for 24 hours and switched back on etc A day or so later we checked the drainage channels in the freezer and they were blocked solid with ice (never defrosted properly the first time), we got a hair dryer on it and defrosted...

Hi My Parents have a Hotpoint Mistral FF60, If the fridge & freezer is warm. Ice cream is not hard They have thermometers in both compartments Freezer is reading -15 Fridge is reading +10 ......... fridge setting is turned up to number 8 with 9 being max I believe this model of...

Is this problem on all Condensing boilers ? Or is it just Condensing Combi boilers and Condensing Conventional boilers are OK ?

Just to update/finalise this thread - I've fitted my TRV's, I went for Siemens TRV's from Screwfix http://www.screwfix.com/prods/71015/Plumbing/Radiator-Valves/Siemens-MTN51GB-White-Chrome-TRV-10-15mm-Angled Bi-Directional and Liquid Sensor. I fitted 8 TRV's and also fitted a Salus Digital...

Yeah I will do, I got a litre of Sentinel to go in aswell, so goin to see how it runs over the next week and then put that in aswell. Thanks Again for all the advice :wink:

Looks like it's running OK at the moment. I put the heating and hot water on together and it stayed on fora hour, so now I have just had the heating on for about a hour and seems to working fine. I'm thinking that having the heating with hot water on has done something ? The TRV's seem to be...

I've just - Removed all TRV Heads The 3 way valve in the airing cupboard, I forced the lever to Manual (Open was the other option) Bled all Rads - downstairs 1st (Hardly no air came out) Bled the pump (Hardly no air came out) Bled the 2 pipes near the 3 way valve (Hardly no air came out)...

Kevplumb - It's a Halstead 50 Boiler, the 2nd picture you put up looks like my 3 way valve in the airing cupboad. XR4X4 - Thanks for that, I'll try that tomoz - System was working fine beforehand :wink:

I have a conventional central heating system with a header tank in the loft. I've just fitted these Siemens TRV's from Screwfix http://www.screwfix.com/prods/71015/Plumbing/Radiator-Valves/Siemens-MTN51GB-White-Chrome-TRV-10-15mm-Angled They are Bi-Directional so don't think it's them causing...

Sorry but another question What advantages do the more expensive TRV's have over the cheaper ones like i have put a link to in my 1st post ?