Search results

You need a trv head , quite a common problem on the myson contract trvs

Had the same on a 7 year old baxi 105 he last week . 3 sections of the vertical flue all split .

How do I do that ?

i have one of the valves in my garage if you need it, its new but must have been there over 10 years, if you pay the postage you can have the valve for free

have cut the pipe going to the expansion vessel before and just put a 10 mm compression cap, then fitted external expansion vessel. hope this helps ( it could have been a 8mm cap not 100 percent certain)

you could try beamish or a antiques dealer :D

viessman 200 spark generator is the same as the baxi duotec but is over 3 times the price

If you want this done why dont you pay a heating engineer to do this for you. What do you want for the money you have paid.

Agile when did you last fit a full heating system, a boiler swap takes you 3days how long for a full heating 3weeks . you head is so far up your backside mr perfect :

Dont get either both cheap crap.

Tony change the full reversing valve about £55, you get all the washers with the valve not that hard takes about 1 HOUR.

There defo is a worcester 230 combi worked on quite a few

Is your boiler showing a S53 code ?

Hi can anybody advised on the part number and how easy it is to change the front windscreen wiper/ indicator switch on my 2006 vito van. The switch has been repaired before for the same fault windscreen wipers not working i think he said he resoldered a loose wire thanks mick

The diaphram number is 05457000 for a pack of 10 just tell them u only need 1 parts centre were selling them off about a year ago about £10 for 10 only used 1 since. Not sure about the number for the full valve but just ask for a s d water valve.Its easier to change the full valve as you get...

Sounds like new diaphram needed in water valve same as the 623 but more room to remove it.

Might just need calibrated have a look in the instructions it should tell you how to do it.

Remeha

Is your system a sealed system as the ecotec 428 is an open vent boiler ?

Look at the back of the pcb top left hand corner about the fifth joint in, i bet it needs resolded had this loads of times for the same fault