Search results

i have a drip coming from where the hose joins the shower box and this come out of the head and i waste alot of water is it possible i need a new washer in the electric shower.The shower is a triton as 200x how do i get the front panel off? i have un done the two screws but it stll doesnt cme...

Ive got two more tiles to put up. they both need shower pipes to come through i need a 32mm hole for the shower. Ive brought a tile hole cutter and it doesnt work they are cermaic tiles and im pulling out my hair on a way to cut a perfect hole 32mm in both tiles? please help

I have just brought the freeze master and havent used one before any one no the best way to tell when the water is frozen so i can cut with out worrying about water coming out? thanks

My shower has suddenly stooped on the hot side its thermostatic shower and the cold come out really powerful but the hot doesnt come out all of a sudeden? any ideas

Im going to drill through a outside wall with a new 110mm dimond core drill bit for a new toilet ive got a 24v drill and a new diamond core drill bit(110mm) and tips off any one?

Im putting in a new toilet and am going to run in to a soil pipe three meters away do i just cut in and use a three way T?and also can the bath and shower waste join the new soil pipe nad how?

im running shower pipes up a already tiled wall i have replacement tiles to match. whats the best way to get a one row vertical line of tiles off with out breaking the other tiles and without using a angle grinder(havent got one)? thank you

Im running a new shower in bath room and need to cut into the tiles and wall to run new pipes up, and then replaced the tiles ive removed. i need to remove a vertical line of about 6 tiles 250 x 250 tiles, whats the best way to remove these tiles without breaking any others?

just a quick question whats the best way to pass pipe through joists is it with a chisel or hole saw etc..?and the best way to drill through a plastic cistern for a new cold feed for a shower pump?

the only way(because of the pipe work) i can run a pump to the shower is using a single impeller on the hot and run the cold off the mains to a thermostatic shower?any one see any problems with that?

i have tried to replace the lights and swtiches downstairs, the switches i done one by one tested to see if they worked and hey where fine. I then gace the lights ago far to many wires than i thought i swapped like for like and consumer unit switched out and obviously done something wrong so...

Any one know any websites or stores thati can get a cheap electric pipe freeze?

my hot tap stoped working suddenly in the kitchen any ideas?

ive got to put a shower pump in a really tight spot is there slim line ones on the market?

theres no where for me to put a new shower pump apart from a shelf in the airing cubard? could i put it on one?

My central heating takes about a hour to heat up if not more what could be the problem?

ive just started plumbing for myself after doing city and guilds level 2, three times ive done private jobs involving central heating and eveery time i fill up the system it gets air in and causes problems? any tips on filling up properly? thanks for your time

ive just turned boiler, pump off etc.. drained a system down removed a radaitor capped off the pipes, filled back up turned the boiler on etc.. aired. 3 radiators are really hot like normal but two get hot at he top middle and bootm cold and then that hot at the top gets luke warm and the bottom...

im need to get the hot and cold pipes inside a concrete wall for the shower whats the best way to cut the gap out? thanks

the only place i can put my shower pump is under the bath due to space any tips on installing? I gather i have to use a surrey flange for the hot and a new supply from the tank for the cold, but going under the fllorboards up to under the bath then down agin under the floorboards to the shower...