Search results

I'm fed up of buying cheap rubbish multi tool quick change blades. I have decided to invest in some decent quality longer lasting blades. Can anybody help with suggestions? Thanks in advance. David

Hi all, Thanks for all your help. I scribed the base and trimmed it down. Looks perfect now. David

Hi, I want to fill the small gap at the top of my skirting board without having to paint over it in white gloss. I just need to run a small bead around. Any suggestions on a suitable sealer that doesn't need painting. Thanks for your help David [/code]

Thanks for your reply. I would love to have another Henry but my budget won't allow me to spend that much. The ash vacuum sounds like a solid machine that would take the odd knock or two. Thank you again for all your replies. David

Hi, Thanks for the reply. Under normal conditions I would but it comes down to cost. Any thoughts on the Ash Vacuum?? David

Hi all, My old vacuum cleaner which I used in the shed for many years has passed away and gone to the scrap yard. I'm looking for a new suitable vacuum for using when doing general DIY and found the Ash Vacuum Cleaner (Warmlite WL28005A) which looked perfect and at a good price. My question...

Hi, I'm starting a project sealing up a room that is currently open plan. I need to know how thick the plaster finish will be on the plasterboard so it matches with the other walls. I was thinking about 4-5mm is this too much? Thanks in advance David

Hi, I need to fit a switch on the wall to opperate a waste disposal machine. What type of switch can I use. I don't need anything fancy just a plain white switch or toggle. I've got a 13a fused socket installed under the sink. An air switch is too expensive. Thanks for your help David

Thank you. Any suggestions on increasing the main pressure?

I have an upstairs shower room which is suplied by a combi boiler. When having a shower if one of the other family members turns on the tap downstairs or even worse flushes the toilet the shower comes to a stop. I'm in the process of having a large extension which will include an extra shower...

I have now noticed that I have put the question in the wrong place. Your comments are extremely useless and pointless but thanks how about being helpful

I have a 20'x8' shed and need to make a soakaway. My soil is good without clay. How big would I need to make it. Thank you

4mm cable sounds good. Any ideas on a good supplier. Thank you very much for all your comments David

Forgot to say that my current shed which is next to the house is currently supplied from the house consumer unit using a M6 Type 1 16a MCB. This has been fine using 2.5mm twin + earth cable. Now due to a extension I need to move the shed to the bottom of the garden. I hope that this bit of extra...

The cable will come straight from the main house consumer unit and then it will connect to a Garage Consumer Unit (Screwfix Ref 63138). I hope that this would provide enough protection? Thank you

Thanks for your prompt replies. Happy Easter David

Hi, i'm fitting power to my shed at the bottom of the garden which is 40m away. What size cable will I need to use would 2.5mm twin + earth be ok or will I need to use 6mm? I will need to run lighting, radio, one power tool at a time. etc. 2.5mm cable would be great as it will be easier to...