Search results

  1. Z

    How to put a mezzanine floor in Garage for Storage?

    I have a 1930's brick built garage with a good amount of wasted roof space above head height. It is a semi-detatched garage with the three non adjoining walls being single brick. I guess it is not enough to bolt a supporting beam, for the rafters to the external and adjoining walls. Would I have...
  2. Z

    Hoover E14 code

    My washing mashing machine (Hoover DYN8124D) is showing an E14 code, which i believe is the heating element. My question is, How easy is it to replace and any tips? Regards Zarni
  3. Z

    Stuck UPVC window lock.

    The handle is stuck in the locked position, key turns in lock, however when pushing in the lock button to turn the handle, it remains stuck. I cant take the handle off, due to one of the screws being covered by the locked handle. Zarni
  4. Z

    how to replace Beko Dryer drive belt?

    Hi, I have a BEKO tumble dryer DRVT61W. Belt has snapped and i have the replacement, how do I get the belt over the motor pulley? Thanks in advance Zarni[/b]
  5. Z

    need a new Oil boiler!

    I need to replace a very old oil fired boiler. It needs to be for hot water and heating to replace a floor standing boiler vented to an external wall. Any advice would be much appreciated. Zarni
  6. Z

    hoover WM code E14?

    hi I have a Hoover DYN 8124D washing machine, displaying error code E14, any ideas what this means? Zarni
  7. Z

    whats best "cheap" washing machine?

    my hotpoint wml540 has bitten the dust. bearings have gone and looks like the motor has gone too. I cant afford much, circa £200 max. options so far are Tesco Own brand wmv510 @ £159 Beko wm5101w @ £169 whirlpool awo/r4205 @ £179 any thoughts? Zarni
  8. Z

    hotpoint WML540 = NOISY!!!

    Hi, my washing machine has decided to sound like a jet engine taking off, when on the spin cycle. It sounds like noise mufflers have been removed. i have checked the concrete weights, they are secure and no sound of knocking, the WM is level. any thoughts? Zarni
  9. Z

    BBQ area / tiling / work surfaces?

    I have a double brick built BBQ that uses charcoal, i would like to tile the outside surfaces (so no direct heat). 1st question - will normal kitchen type tiles and adhesive be ok, if not, what would be better? I would also like to build a work surface nearby, with storage space under...
  10. Z

    BBQ area / tiling / work surfaces?

    I have a double brick built BBQ that uses charcoal, i would like to tile the outside surfaces (so no direct heat). 1st question - will normal kitchen type tiles and adhesive be ok, if not, what would be better? I would also like to build a work surface nearby, with storage space under...
  11. Z

    Leisure Cusine Master ELECTRIC cooker

    Hi, Everything works apart from the grill. Does it have a separate fuse within the cooker? Zarni
  12. Z

    Indesit IDL705 Dishwasher - dirty pots!!

    Help!! Everything appears to be working normal, it heats, washes, dries but still some of the pots and pans are still dirty or have a residue on them. salt and rinse aid are ok. Thnx Zarni.
  13. Z

    Immersion Heater not working!

    I have checked the fused socket, the fuse there is good. so i assume that the element is "dead". Is it easy to replace? any tips/ advice would be greatly appreciated. Zarni
  14. Z

    IDL 705 error codes

    rocks1 wrote: Led 1= Prewash / 3hr Led 2= Wash / 6hr Led 3= Rinses / 9 hr Led 4= Drying / 12hr LED. illuminated 1 = Overflow ( water in base ) 1+2 = Pump timeout, or Software recognition error ( timer not programmed, wrong keypad) 1+3 = Circulation pump not working 2+3 =...
  15. Z

    Indesit IDL 705, keeps tripping main house fuse

    About 10 minutes into its cycle, my dishwasher has started to trip the main house fuse. I have checked the power lead, no apparent kinks or damage. The moulded plug is intact. Any Ideas please? Zarni
  16. Z

    Ikea Kitchens, a good deal?

    Over the years i have fitted a few kitchens in houses ive bought. and sadly i am about to do the same again!!!!!! from a high street point of view, IKEA seem to be the best value, they offer a 25 year g/tee on units, nobody else does that. am i missing something here? zarni
  17. Z

    Hotpoint WML540g ANY GOOD?

    Old indesit has finally given up the ghost. I am looking to buy a new machine and this has caught my eye, but is it any good? never had Hotpoint before. Zarni
  18. Z

    indesit WIL143S Hydraulic strut gone?

    On fast spin machine makes an horrendous noise and the outerdrum is wobbling all over the place. one of the two hydraulic struts seems to have far too much grease around the bottom of the strut. is it the bearing that has actually gone, or a i suspect, is it possible for the seal on the...
  19. Z

    indesit IDL 705 lights flash

    Dishwasher wont work, lights are flashing 3h and 6h any ideas?
  20. Z

    External Doors and windows replacement and moving

    Hi, I am considering replacing / moving doors and windows(installed 1992). mostly like for like size wise apart from. 1 - bricking up backdoor and changing window next to it to french doors. 2 - Bricking up Kitchen / front door and changing hallway window to a door, which was where the...
Back
Top