humidity

  1. A

    Will creating 2 vents solve loft moisture problem?

    When it's very cold, moisture drips from the felt under the tiles of the roof. It could be up to 50 years old (70's house) so it will not be breathable. No issues whatsoever during the heaviest rainfall. Currently, there does not seem to be any source of fresh air (no eaves providing this) so...
  2. T

    Air bricks from inside the house

    Hi there My house has high humidity levels and I’m thinking installing air bricks would help (I already have sub-floor air bricks but installing other air bricks higher in the wall might help). I haven’t seen any photos of air bricks from higher up in the wall from inside the house. I’m...
  3. G

    Mould / damp humidity issue.

    So I have a black mould stop at the top corner of my house. I believe it's a cold wall and we have high humidity causing it. It is always around 80 this time of year. Before looking at PIV systems which will take time to research I thought I would look at a possible cause. On one of the same...
  4. Greg_0ry1

    Best coving material for bathroom

    I have nearly finished my downstairs guest toilet/bathroom and would like to give it a nice touch with ceiling coving. I know it’s not an issue reading previous articles on here but I am unsure which one is the most recommended due to humidity? I don’t want to have too much mess if I can avoid...
  5. E

    Loft humidity in Victorian house

    Hi there, We moved into a Victorian house in the summer, however a few weeks ago when up in the loft I noticed some mold growing on some of the rafters against the roof, and the rafters themselves felt a bit damp to the touch. The roof it fairly new (approx 10 years old), felted and not...
  6. F

    Painting satinwood over old gloss - losing my mind!

    Hi all! I am having an absolute headache trying to work out exactly how best to do this. I've spent hours researching and there seems to be so many conflicting comments out there. I wish to repaint all of the gloss in my house with a satinwood finish. There are several layers of paint on the...
  7. C

    Fumes in house and excessive damp

    Good evening. I hope this is the right place for some advice. I’ve been having issues with damp and air quality in the house. So much so when the boiler was running (before it got turned off by Cadent) the bedroom above the boiler smelt really bad and the air was putrid like stale air. It caused...
  8. R

    Cure for high humidity

    My daughter recently bought a 1920's semi-detached house. I noticed that the inside humidity was higher than you would expect, typically higher 60's to early 70's. This high humidity produces quite a lot of condensation even though the fanlights are kept slightly open. The house itself is not...
  9. Techboy

    Recommendation for Bathroom Air Extractor with Humidity Sensor

    Hi all, Please can you recommend me a bathroom air extractor with humidity sensor. I'm looking to buy 4 to replace the ones that I currently have (all 10 years old and noisy/failed - I moved into the house 3 years ago). 3 bathrooms with showers/bath and 1 room with just a toilet. I have looked...
  10. S

    Insulating and humidity-proofing shed

    Hi, I'm looking for some advice on how to go about insulating and humidity-proofing my shed with the hope of going on to turning it in to an indoor tropical rainforest type of thing with pineapples, figs etc and maybe even fish at some point (in Scotland) . It was a pigeon coop/house and...
  11. M

    Relative Humidity

    Hi all, Big old Victorian Semi-detached house, hermetically sealed with too much wallpaper, a damp cellar wall, (although cellar is reasonably well ventilated and shut off from the rest of the house) . When we moved in the bathrooms didn't have extractor fans, have fitted one, planning to...
  12. M

    Dry rot? Or efflorescence on plastered wall after damp?

    Hello, Could someone please help me identify what this could be? I had a leaking pipe in my utility room- for a very long time. It was under the laminate floor and went unnoticed. This is now fixed. In the utility room I also use a condenser, which leaked allot. This no longer gets used...
  13. andyr123

    Wiring up 4" Extractor Fan with Timer & Humidity sensor just for Humidity mode

    Hello - I have this 4" Extractor Fan with a Timer and Humidistat circuit board in it - there are 2 adjuster screws (pots) and one is for timer, one controls humidistat. For using timer you need 3 wires, 1 neutral, and 2 Lives (1 switched live, 1 permanant live) - the wires I have coming into the...
Back
Top