immersion heaters

Hi all I have a hot water cylinder that is heated both by a gas boiler and an electric immersion heater. For the electric immersion heater, I have one heater but two adjacent switches. Please can someone explain? And should I keep one or both turned on? A second puzzle is over the weekend, my...

I have moved into a new apartment and it has an Aztec electric boiler and a Tempest water tank but I have no clue on how to use it. I have a thermostat for the radiators so that just clicks on when i turn the heating up however i would like to know how to set a timer on the water tank so that it...

Hi, Somebody please help! I have recently moved into a home with a Telford Tristor Thermalstore used to heat the water in the flat. Problem is that after 1 and a half showers, hot water has run out. In fact, the hot water is never really that hot. A plumber has been over and changed the...

We don't generally use the immersion heater so I'm planning to wire it into a Solic 200. First - to make sure it is working I removed the old time clock and controlled it direct from the 16A MCB switched spur - 80A RCD tripped. Isolated the tripping to the immersion heater, as wiring a light...

Hi all, I have a Heatrae Sadia Megaflo water heater. The heater has two immersion elements, both of which have been wired to separate 20A control switches. Unfortunately, the heater is not programmable and has no timer settings. I do not use the booster heater. The primary heater I manually...

hi, What kind of set up is this? Are here two heaters? If so why are they not at the top and bottom of the tank? I'm trying to fit the solar iboost Image by Justtin posted 29 Sep 2017 at 10:17 AM