pushfit

Hi, I do a lot of my own plumbing. I taught myself to solder but I don’t do enough (it’s not my day job) to get a good technique going so I’ve mostly done compression fittings. I had a real plumber move some pipes around ten years ago (a job that I didn’t want to attempt at the time but would...

Hi, First time here and looking forward to learn. I am right now doing up my new house, build with 9 inch thick brick walls, and I am using the HEP2O Push fit system. I have a room adjacent to a yard and in this room i will have a tap so I have a push fit 15mm pipe from this room, through the...

So floplast are changing their hot and cold pushfit fittings it seems and so screwfix have stopped selling them and are running down old stock. A PITA since I have a project on the go which has used floplast. I have reels of pipe but needed some more fittings for next stage - no joy. Hence I...

hi I bought a house with speedfit plumbing , mainly their pipe , few compression fittings used too. Not sure how old it is I noticed on all the fittings the threads we’re slightly loose. They weren’t leaking, but are they just working loose from slight vibration of the water flow ? And are...

Anyone know how to remove these osma gold pushfit ??? Cannot for the life of me do it

Hi all, I know its a hot subject but I have used it in my sons house several years ago. I am using it again and wonder where are the technical documentation for the installation? Or how to For instance When installing up to the radiator, is it okay to run the 22mm pushfit pipe 45 degrees or...

Hi, My electric shower packed in and I was able to find a replacement 'shower engine' online for it, unfortunately it seems like some type of pushfit elbow was used to connect the shower originally. Could someone please tell me if the connection between the shower and elbow can be disconnected...

Hi, It is my first post on this forum so I would like to welcome everybody. I have been trying to change a tap in the kitchen for few hours and finally decided to try my luck on this forum. I have looked spend few days googling around before I started the work but I didn't find anything...