unit

Hi What thickness of MDF do people recommend for a storage unit. It will be self supporting off the floor and fit onto a end wall measuring 3m x 2.4m. The base unit including the circulation space behind will be about 600mm deep, the cupboards and shelves etc. above will be set back and total...

Hi Everyone after 2 bad experience with carpenters and waiting them for months ending up with quality job worst than a beginners and still paid premium price. I decided to have a go and install kitchen myself. Units would be Howdens solid pre- assembled cabinets. any tips on how to stick them...

Hello, I hope everyone is well. I am having some issues with my Creda Digimix Shower. It works but it is not reaching the correct temperature. For example, the range is 1-9 with a L and H setting. The normal range has always been 5/6 and this produces hot water. However, recently any setting...

Hi, My garage has a fused spur with 2 security lights and a double socket from a short run of 2.5mm T/E directly from separate 16A breaker. Can this be extended to add an external socket back to back or other or do I need to redo the setup to accomodate. There are no other spare slots in the...

I've been looking online at a new sink base unit that's listed as having a 40mm void to it's rear? Is it 40mm, or is it actually larger in order to accommodate the compression connections etc? My existing sink waste pipe is slightly over 40mm anyway, with the various connectors being...

I have them on my doorstep, failing that it's Bristol or Newport/Cardiff for other sheds..

Is it possible to get good quality old style all-in-one kitchen base units, but on legs (no carcass, or separate end panels). I'd like to drop a sit-on sink into a 1000x600 base, and I need a 500 wide drawers unit, both on legs...? A few new wall cabinets would be good too, if I can find...

If a 600 deep (30thk) worktop or sit-on sink have a roll front, then this means that they actually measure up as 615 deep, because of the radius, right? Thank you, Dain

A contractor removed a fuse box from the bathroom and put a CU in the kitchen above, see image of connection blocks between original tails and new cables to the new CU, and their position directly below the sink bowl as defined by tap upstands and various waste water pipes. Electrician says that...

Hi, hope you're all good. Some friends and I are looking to lease an industrial unit for various hobby purposes. The unit is adjacent to a large storage area which is in continuous use, however we need to create a corridor that passes along both units by building a wall to make our unit secure...

Recently got a new front door - the Endurance Fuji door which has a narrow pane of glass in the middle of the door. Is it normal for the glass unit in the door to have a slight movement to it when its pushed? The reason I pushed it was because I can hear a small amount of outside noise coming...