1/4 in. x 3/8 in. Male Brass Adapter

[pidgeon1]

1/4 in. x 3/8 in. Male Brass Adapter


Any ideas where I may obtain one of these ?

Thanks.

 

[stardanny]

BSP? What it use for?

Daniel.

 

[adlplumbing]

http://uk.rs-online.com/web/p/produ...|prd|2039016&gclid=CPaO0eavwMwCFSQW0wodQWMO_g


google is your friend

 

[muggles]

When you say adapter, do you mean male to male, male to female, female to male, or female to female?

EDIT:OK you did say Male, so it's not the last one...

 

[jeff the gasman]

Quarter nipple with three eighths X quarter bush?

 

[pidgeon1]

Found this, looks right.

any chance there is a UK supplier ??

http://www.ebay.co.uk/itm/Brass-Mal...ings-Connector-Reducing-Adapter-/262059849808

 

[denso13]

http://www.aircompressoronline.co.uk/product.php?id_product=167

 

[pidgeon1]

http://www.aircompressoronline.co.uk/product.php?id_product=167

Looks the part and UK.

Thats a very quick reply.

Thanks

 

[PullerGas]

If it's a 3/8" X 1/4" brass nipple you're after; most Plumbers' merchants will stock 10x8mm compression coupler. Remove the nuts & olives, hey presto a 3/8x1/4" BSP nipple.......

58p here;
http://www.jtmplumbing.co.uk/pipe-f...mOYEF1wCqoIvjAsdY8QJtfJf8qGFwbt9LkaAibu8P8HAQ

 

[pidgeon1]

If it's a 3/8" X 1/4" brass nipple you're after; most Plumbers' merchants will stock 10x8mm compression coupler. Remove the nuts & olives, hey presto a 3/8x1/4" BSP nipple.......

58p here;
http://www.jtmplumbing.co.uk/pipe-fittings-c433/compression-dzr-fittings-8mm-54mm-c289/jtm-dzr-compression-reducing-coupling-pp9642?utm_source=google&utm_medium=cpc&utm_term=jtm-dzr-compression-reducing-coupling-dzr-10x8mm-size-10x8mm-wras-size-10x8mm-wras-approved-m10100800dzrma&utm_campaign=product+listing+ads&gclid=Cj0KEQjwx7u5BRC1lePz2biJpIYBEiQA-ZeDmi3ifmnKsmOYEF1wCqoIvjAsdY8QJtfJf8qGFwbt9LkaAibu8P8HAQ

Going to use on pressure washer.

 

[PullerGas]

If it's a 3/8" X 1/4" brass nipple you're after; most Plumbers' merchants will stock 10x8mm compression coupler. Remove the nuts & olives, hey presto a 3/8x1/4" BSP nipple.......

58p here;
http://www.jtmplumbing.co.uk/pipe-fittings-c433/compression-dzr-fittings-8mm-54mm-c289/jtm-dzr-compression-reducing-coupling-pp9642?utm_source=google&utm_medium=cpc&utm_term=jtm-dzr-compression-reducing-coupling-dzr-10x8mm-size-10x8mm-wras-size-10x8mm-wras-approved-m10100800dzrma&utm_campaign=product+listing+ads&gclid=Cj0KEQjwx7u5BRC1lePz2biJpIYBEiQA-ZeDmi3ifmnKsmOYEF1wCqoIvjAsdY8QJtfJf8qGFwbt9LkaAibu8P8HAQ

Going to use on pressure washer.

Well, if it's what you're after I'm sure it'll do the job nicely.
Now my experience, knowledge, qualifications & advice is not free. So if I've saved you a few bob & got you out the poo. Stick a couple of quid in a kids charity box the next time you pass one. Thanks.