Hi guys,
I have quick an intricate racking system in my lwb hi top transit, that i made with 18mm ply (not WBP). Its built purposely on an angle to strap glass to, and the opposite side also holds tools.
Obviously there is condensation forming on the roof and this has started to form mould on parts of the racking and i was wondering whats the best way to get around this as its starting to niggle at me?
I attempted to sand (with dust mask) but to no avail, and am bothered that if its painted with something cheap - that it will peel with tools being slid in and out.
Removing and replacing the rack is not an option - hoping there is another way *fingers crossed*
Was considering painting with something stubborn like floor paint?
Many thanks in advance.
I have quick an intricate racking system in my lwb hi top transit, that i made with 18mm ply (not WBP). Its built purposely on an angle to strap glass to, and the opposite side also holds tools.
Obviously there is condensation forming on the roof and this has started to form mould on parts of the racking and i was wondering whats the best way to get around this as its starting to niggle at me?
I attempted to sand (with dust mask) but to no avail, and am bothered that if its painted with something cheap - that it will peel with tools being slid in and out.
Removing and replacing the rack is not an option - hoping there is another way *fingers crossed*
Was considering painting with something stubborn like floor paint?
Many thanks in advance.