Hi,
I am replacing my current free standing cooker with an intergrated hob and oven. The cooker is on a dedicated circuit with 45A fuse, I was planning to wire the exisiting cable into the 5.8kw hob and replace the 45A fuse with a new 32A MCB:
http://www.screwfix.com/app/sfd/cat/pro.jsp?cId=A331832&ts=93154&id=87979
For the oven I was going to spur off a nearby ring main socket and then into a 20A DP switch http://www.screwfix.com/app/sfd/cat/pro.jsp?id=66137&ts=90628
Which then fed the oven under the worktop into a unswitched 13A socket
http://www.screwfix.com/app/sfd/cat/pro.jsp?id=45445&ts=90696
Can you confirm this is ok and also the other problem is, I have a chimmey hood that needs power where is best to wire this into. As I cant create 2 spurs from the socket or can I?
Thanks.
I am replacing my current free standing cooker with an intergrated hob and oven. The cooker is on a dedicated circuit with 45A fuse, I was planning to wire the exisiting cable into the 5.8kw hob and replace the 45A fuse with a new 32A MCB:
http://www.screwfix.com/app/sfd/cat/pro.jsp?cId=A331832&ts=93154&id=87979
For the oven I was going to spur off a nearby ring main socket and then into a 20A DP switch http://www.screwfix.com/app/sfd/cat/pro.jsp?id=66137&ts=90628
Which then fed the oven under the worktop into a unswitched 13A socket
http://www.screwfix.com/app/sfd/cat/pro.jsp?id=45445&ts=90696
Can you confirm this is ok and also the other problem is, I have a chimmey hood that needs power where is best to wire this into. As I cant create 2 spurs from the socket or can I?
Thanks.