I want a combi boiler with a vertical flue for a small flat driving 2 medium rads and a towel rail. The boiler size calculator suggests 3kW maximum heating load. Are there any that can modulate down to under 2kW heating?
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
2kW combi boiler for small flat
- Thread starter ajrobb
- Start date
Put in an Electric Panel heater - it will be a lot less bother!!
P.S. are you sure you have done your Calcs properly??
P.S. are you sure you have done your Calcs properly??
Put in an Electric Panel heater - it will be a lot less bother!!
P.S. are you sure you have done your Calcs properly??
the pilot from an old BBU would suffice for this job!!
not a great lover of electric wet heating, but it could be an option here, given the small output i cant see the leccy bills being too high, you say you need a vertical flue for the boiler, these get expensive to fit when you take into account all H & S issues, however if you are sure you want a combi 9for the hot water side) then any of the 24kw combis will work fine, they electronically modulate down to the load you require.
Vertical flue should be OK as flashing immediately above has to be replaced anyway. Another alternative might be an unvented cylinder hung off 1825 brick wall instead of the boiler with space for washer underneath. Ceiling height is only 2.15m.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
