2nd hand Baxi Bermuda

[Chrissie1]

I've been offered a 2nd hand Baxi Bermuda Inset 2 for free, I've seen it fitted & working the back boiler had been disconnected due to a combi having been installed and the front was being used as a "normal" fire.

What I want to know is can it be installed and used as it is?

I'm not interested in the back boiler being plumbed in I just want to use the front.

Is it worth bothering with????

Any help appreciated as long as it's constructive

 

[hertsboilers]

The front fire is somehow attached to the back boiler, without the back boiler support you have a lot of extra things to do to fix the fire, not suggested.

 

[Dan Robinson]

I've heard it all now

 

[expertgasman]

The front fire is somehow attached to the back boiler, without the back boiler support you have a lot of extra things to do to fix the fire, not suggested.

Your username would suggest that you should know that you can not use a fire designed for a BBU as stand alone!

 

[Chrissie1]

I've heard it all now

Hardly constructive m8

 

[Dan Robinson]

Depends on your point of view I suppose.

 

[gazthepottertonengineer]

This fire cannot be used safely without being attached to the back boiler it was designed tested and certificated to go with! Simple as that

 

[hertsboilers]

The front fire is somehow attached to the back boiler, without the back boiler support you have a lot of extra things to do to fix the fire, not suggested.

Your username would suggest that you should know that you can not use a fire designed for a BBU as stand alone!

Qualified but don't know everything about fires. Thanks for pointing.