3/4 BSP nipple 55mm long.

[Stivino]

I'm looking for two 3/4 nipples or lengths of pipe. I need them to be 55mm long, I can cut them if they're longer.
I have two old bath taps here which I could cut the tails of but, I want those taps.
Apart from buying a pair of taps, where is the best place to get them?

 

[ianmcd]

look at part no 21367 is that any use to you ?

http://www.bes.co.uk/products/158a.asp#21367

 

[Stivino]

Thanks for that, that would do the job admirably.
I wonder if I can get that or similar at a bit better price.

 

[ianmcd]

at £7.44 and one could be cut down twice to provide you with two ? I can see now why you want to keep the taps , you could probably scrap the wee bit left over for about 23p so not as expensive as you though t

 

[doitall]

If you have a threading machine make your own

 

[Stivino]

If I did have a threading machine I would make one.

 

[Whitespirit66]

It's true what they say!

 

[Terry lambert]

You could try going to the scrap yard and see if he has an old pair of bath taps. cut the tails off of those

Factoring in petrol, time over effort you might save thruppence

 

[Terry lambert]

It's true what they say!

I knew I should have paid more attention at school, what is it they say?

My dad would say a fool and his money are soon parted, but he was a tight cantankerous old git

 

[Stivino]

It's true what they say!

I take it you mean that if you have nothing useful to day, don't say anything.
I mananged to achieve what I set out to do.
Thanks to all who made a useful contribution.