Hi, I have two questions in 1 here.
I'm fitting my first bathroom ever and decided for some realy strange reason to make my life as difficult as possible.
Firstly I bought a funky chrome bottle trap with a 32mm O/D waste (well done me), there must be an elbow that does 32mm od to id or a 32mm od elbow and an adaptor - can anyone suggest a good source?
Secondly, I have some more funky bits, hudson Reed wall mounted taps. The spout has a 3/4" fitting so I've bought a 22mm-3/4 'T' piece. Obviously this doesn't line up with the taps when I tighten it up. The website says 'use ptfe tape or other suitable sealant' to make it watertight without it being done up tight - this doesn't seem altogether 'safe'. Any advice on the best way forward would be gratefully received.
TIA
Andy
I'm fitting my first bathroom ever and decided for some realy strange reason to make my life as difficult as possible.
Firstly I bought a funky chrome bottle trap with a 32mm O/D waste (well done me), there must be an elbow that does 32mm od to id or a 32mm od elbow and an adaptor - can anyone suggest a good source?
Secondly, I have some more funky bits, hudson Reed wall mounted taps. The spout has a 3/4" fitting so I've bought a 22mm-3/4 'T' piece. Obviously this doesn't line up with the taps when I tighten it up. The website says 'use ptfe tape or other suitable sealant' to make it watertight without it being done up tight - this doesn't seem altogether 'safe'. Any advice on the best way forward would be gratefully received.
TIA
Andy