9448+ alarm

[Boss1]

I replaced the battery in my 9448+ alarm. Since then it won't arm and lights up zone 4 when i try to set it. Any ideas please.

 

[sparkymarka]

have you pulled a wire out in panel on zone 4 ?

 

[Boss1]

Hi,Thanks for your suggestion. Just checked and i dont appear to have done so.
Also after fitting my new battery it lost the code and i had to start using 1234.
The sensor at zone 4 also lights up when i wave at it.

 

[sparkymarka]

you have defaulted panel, check if it has any thing connected in zone 4 if not link it out as you can program spare zones as not used, if it defaults to factory set it cancels this. fully test all zones afterwards by setting system and activating the detector.

 

[Boss1]

Well having worked at the bloody thing all afternoon i can say it has broke me.
Regardless of what i do or press the alarm won't reset. Thanks for all your help but i need a whiskey.