I'm having trouble getting hot water only - I have a Potteton Flamingo boiler, I'm guessing its a fully pumped system as all pipework is 15mm and 22mm, room stat , cylinder stat and what I think is a Cyltrol valve.
Its a landis and gyr traditional dial/slide programmer.
I'm guessing the problem is with one of the two 22mm ACL lifestyle motorised valves.
The heating works fine, but I can only get Hot water when I select Heating and hot water. And I only get hot water when the room stat is turned up high.
When I select hot water only, the boiler doesn't come on.
It has worked fine in previous years.
If anyone could assist as to possible problems I'd be grateful.
Thanks
Its a landis and gyr traditional dial/slide programmer.
I'm guessing the problem is with one of the two 22mm ACL lifestyle motorised valves.
The heating works fine, but I can only get Hot water when I select Heating and hot water. And I only get hot water when the room stat is turned up high.
When I select hot water only, the boiler doesn't come on.
It has worked fine in previous years.
If anyone could assist as to possible problems I'd be grateful.
Thanks