THE VENTING REQUIRED IS TO CIRCULATE AIR UNDER A WOODEN FLOOR IN A BUNGALOW TO INSTALL AN AIR BRICK WOULD INVOLVE LIFTING THE BOARDS.THE VENT WOULD HAVE TO PASS THROUGH BOTH WALLS. I WAS CONSIDERING USING A CORE CUTTER AND FEEDING THROUGH A STAINLESS STEEL PIPE WITH MESH COVER.IS THIS A GOOD IDEA ?
Suspended timber floor in a house normally a honeycomb sleeper wall to allow cross air flow, are you saying you don't have brick air-vents on the external walls?
I ONLY HAVE 2 BRICKS ON 2 SIDES OF THE BUNGALOW AT APPX 8 METRE SPACING I WAS CONSIDERING AN EXTRA TWO A SIDE PLUS SOME A THE REAR.OF THE AFFECTED ROOM
+++++++++++
Keith, will your turn your "CAPS LOCK" button off please.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local