alarm tamper

22 Jul 2007
Reaction score
United Kingdom
having problems with my veritas 8 alarm panel,alarm keeps going off at different times of day with tamper problems ! so far changed battery and linked out tamper circuit.
I fitted the alarm about four years ago with no problems untill now,
Any help or advise gratefully received
Sponsored Links
Sponsored Links
Link out the bell tamper by fitting a loop from the 12v- to the tamper return.

The wet weather is giving me similar problems.
Remove any wires from the tamper cct(s) and use a link instead, and as joe-90 says link from -ve to tamper return.

also check battery charging voltage, and battery voltage
Also make sure the panel lid tamper is closing.
And also check the keypad is properly clicked into its backing plate as there is an anti tamper spring in there too, which will still be shown on the panel even with all the tamper terminals linked out on the main PCB.
Could be the sounder. Some older boxes flex in extremes of temperature & set off BB tamper.

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Sponsored Links