Hi all,
I have been living in my house for about 12 months now. When I moved in the boiler was working just fine, however about 2 months ago the hot water from the boiler began to cycle temperature, but we just put up with it.
Now, we have no hot water. I have opened the front of the boiler and turned on a DHW tap, the boiler starts and it sounds as if the pump is running, the boiler fires up and the flame can be seen through the inspection hatch.
I have removed the flow switch and the boiler fires up, thus operational.
I have measured the DHW sensor resistance and it shows O/C. I was going to purchase and replace this.
I have also seen on a couple of other forums problems with the diaphragm in the diverter, but this looks a little more tricky to replace.
Could someone please point me in the rite direction?????
I have been living in my house for about 12 months now. When I moved in the boiler was working just fine, however about 2 months ago the hot water from the boiler began to cycle temperature, but we just put up with it.
Now, we have no hot water. I have opened the front of the boiler and turned on a DHW tap, the boiler starts and it sounds as if the pump is running, the boiler fires up and the flame can be seen through the inspection hatch.
I have removed the flow switch and the boiler fires up, thus operational.
I have measured the DHW sensor resistance and it shows O/C. I was going to purchase and replace this.
I have also seen on a couple of other forums problems with the diaphragm in the diverter, but this looks a little more tricky to replace.
Could someone please point me in the rite direction?????
