Am I missing a part ?

Joined
5 Feb 2010
Messages
147
Reaction score
4
Location
Staffordshire
Country
United Kingdom
I bought a clicker type bath waste a few weeks back from my local merchants.
Have a look at the picture,am I missing a part,it doesn't look right to me ?
 
Last edited:
Sponsored Links
IMG_20171008_172756.jpg
 
Sponsored Links
That's the thing,it just sits in the waste, there's nothing physically holding it in.
Surely it won't hold water ?
 
Push the brass bit with the o rings down as far as it will go into the waste, the chrome bit is extendable if you push on it (the clicker) the screw underneath is to adjust the seal on the chrome bit to your basin waste.
 
Push the brass bit with the o rings down as far as it will go into the waste, the chrome bit is extendable if you push on it (the clicker) the screw underneath is to adjust the seal on the chrome bit to your basin waste.
Are you saying it's just held in position by suction from the seal of the 2 black o-rings ?
It goes into the waste very easily,doesn't require any force
 
Oh right.Does it work ?
I'll have to try it,make sure it holds water before I carry on installing the bath.
Cheers
 
As I suspected it doesn't seal 100% so water is going to empty as it fills,not exactly ideal.
Can anyone recommend a different/better one ?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top