any ideas please

[patsy]

any help appreciated,i bought a corner bath and had it fitted, its sides are mahogany panels.when plumber fitted it ,bath had to go quite high cos of pipes,so bottom of panels are 3" off floor.can only think of putting same shape of wood around bottom but as it is a round shape i dont know where to get it or if it can be done ,someone else might have some other solution.bath is windsor mahogany corner from b&q.thanks

 

[david and julie]

The plastic architrave fitted around uPVC windows is available in a dark wood finish and would also bend to suit the bath.

i have never tried this but it may be worth you checking it out.

 

[masona]

If you need them, they are available from Mr Plastic in medium or dark mahogany.

 

[patsy]

masona,whre can i find mr plastic ,on the internet or phone,thanks ,ive never heard of it but will give it a go.

 

[masona]

www.mrplastic.org

Maldon, Essex 01621 842000
Rainham, Essex 01708 522474
Colchester, Essex 01206 794775
Sproughton, Ipswich 01473 745145
Grangetown, Cardiff 02920 665939
Eastwood, Southend 01702 421717


Sales Hotline 0800 02688055

If there not one near you, they will delivery but might be costly way of doing it.

Failing that there should be a pvc cladding depot near you somewhere

 

[big-all]

you can actualy by plastic skirting

now i dont know if you can get it coloured
but you can get it in 95mm 145mm ect sizes
grecian ovlo bullnose ect but you could actualy paint it

big all

 

[david and julie]

Just out of curiosity, will bull nose plastic skirting bend?

 

[big-all]

yep its basicly skiting with a half round on top and assuming
its a normal size bath or less should not be a problem[5 ft]

big all