Hi,
Over a year ago now, we modified our bathroom, wall removed, re-located the bath, tiles, shower etc.
All of the above is fine apart from my shower enclosure, so I wondered if you could help
I'm struggling with my D shaped shower enclosure. It's a long story, but basically I have had the enclosure for just over a year, and have only been able to use it for around two months.
The reason for this is because the wheel assembly's that support the doors keep bending. This allows the door to drop and catch on the bottom guide, and then stop the door from working.
I have had quite a number of wheels over the months, and I, and the engineer have fitted the D shaped profiles at different widths, and none of them stop the wheel assembly's from bending
We have had a new enclosure fitted by the distributors engineer recently, and the wheel assembly's bent within the hour.
I see on the web that there are lot's of companies selling my enclosure, so there must be someone who has experienced the wheel asembly's failing,
So I look forward to any help that you can give me,
Thanks in advance,
Mike
Over a year ago now, we modified our bathroom, wall removed, re-located the bath, tiles, shower etc.
All of the above is fine apart from my shower enclosure, so I wondered if you could help
I'm struggling with my D shaped shower enclosure. It's a long story, but basically I have had the enclosure for just over a year, and have only been able to use it for around two months.
The reason for this is because the wheel assembly's that support the doors keep bending. This allows the door to drop and catch on the bottom guide, and then stop the door from working.
I have had quite a number of wheels over the months, and I, and the engineer have fitted the D shaped profiles at different widths, and none of them stop the wheel assembly's from bending
We have had a new enclosure fitted by the distributors engineer recently, and the wheel assembly's bent within the hour.
I see on the web that there are lot's of companies selling my enclosure, so there must be someone who has experienced the wheel asembly's failing,
So I look forward to any help that you can give me,
Thanks in advance,
Mike