I'm fitting new architrave - the door liner is perfectly upright but the wall is bowed / drunk (and the floor slopes)!
In the pic you can see that the architrave is almost flush against the wall at the bottom but then a gap / ravine develops along the length. Am I
Obviously the ideal solution would be to sort the wall out but the £££s have run dry
In the pic you can see that the architrave is almost flush against the wall at the bottom but then a gap / ravine develops along the length. Am I
- best leaving the gap as it is
using filler to make the architrave look likes it reaches the wall
cut a fillet of wood to make the architrave reach the wall
or something else
Obviously the ideal solution would be to sort the wall out but the £££s have run dry