ariiston euro combi . model sx 20 m ff1 ce .hot water not getting hot. changed diaphram in diverter vavle . descaled calliferer.is problem thermostate. heating working fine .flow rate ,good as previously working well.turn down flow rate via water inlet gets hotter but then no flow no it turns on properly just does not get hot and stays on fine. what the web site to get the instructions and fault finding chart
ariiston euro combi
- Thread starter daisymanone
- Start date
it fires up properly just does not get hot
im not there now whats best possible cause.the pin on the diverter vavle moves up and down i would say its working correctly i can here it working turn tap off heating comes on. is it the board ,gas vavle or not coming to full flame
How do you expect me to know over the internet!
Do the test i told you. Failing that get someone in that knows the boiler.
the pipes do get warm in hot water mode,what do you think mate
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
