baki solo 3 not working

[garytemple]

hi i have a baki solo 3 gas boiler 4 years old it fires up for 10 mins then off for 10 on for 1/2 off for 10 again each time it knocks off the pilot on light lights and i can see sparking through glass but it wont ignite ive had 2 plumbers out already first one said the system is air locked he drained system then refilled then told me he doesnt no ? the plumber number 2 said pump i got new pump still same problem i thought maybe stat but all rads reaching loook warm before cut out so i turned off all rads except 1 and the 1 got pipeing hot which tells me stat not faulty any ideas would be greatly appreciated

 

[expertgasman]

Are you just in from the pub?

 

[Agile]

How much did you pay each of these plumbers?

Where did you find them?

Tony

 

[garytemple]

i didn,t pay them anything cause they are friends of mine they are plumbers but they obviously aren't any good at solving problems expertgasman im not only in from the pub i wish i was have you any advice for me do ya think it might be gas valve solinoid or pcb maybe as i said it comes on for 10 mins then off for 10 on for 1/2 off for 10 on for 1/2 all the time it cuts out the ignitor is sparking trying to like any1 in dublin available to fix this for me

 

[expertgasman]

i didn,t pay them anything cause they are friends of mine they are plumbers but they obviously aren't any good at solving problems expertgasman im not only in from the pub i wish i was have you any advice for me do ya think it might be gas valve solinoid or pcb maybe as i said it comes on for 10 mins then off for 10 on for 1/2 off for 10 on for 1/2 all the time it cuts out the ignitor is sparking trying to like any1 in dublin available to fix this for me[/quote]

The reason I ask is simply that I couldn't understand the gibberish, and still can't. I wish folk looking for help would do us all the courtesy of writing in an understandable manner. At least it isn't in Text "language".

The first thought with this problem would be a circulation issue, but that apears to have been adressed. So now we are looing at an onbard component or sensor issue. I have tried again to read your OP and, frankly, really cannot be 4rsed to decipher.