Basin waste connector to remote trap.

Joined
4 Sep 2009
Messages
80
Reaction score
0
Location
Invernesshire
Country
United Kingdom
I have got to the point in our new en-suite of connecting the two vanity basins. These units have drawers so very little room for a trap without having to cut through the drawers at the back.

I have seen shallow basin traps but the outlet from that would be too high to connect to the pipework. It couldn't be any higher due to the structure of the unit being compromised.

What I thought would be the solution is a connector which screws onto the basin waste and then have a P trap behind the drawers and then a 90 degree connector into the pipework, is this feasible? I haven't seen any connectors which screw onto the basin waste apart from fitted to traps.

I would be grateful for any advice.
 
Sponsored Links
Thanks for that. The cap and lining into a 90 degree bend then to a P trap then to another 90 degree would possibly fit. Don't know if that would be too many bends though.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top